Games with more than two flippers question...

AE35

New member
Joined
Oct 20, 2009
Messages
314
Reaction score
0
Location
Copenhagen, Denmark
Hi all!

How does games with two flippers on one button work? Like Earthshaker,
Funhouse, Black Knight 2000 etc.

There's a double leaf switch instead of a single, but both get driven by
the same bridge on the aux driver board, yes?

So if one of the flippers(top flipper or lower flipper) doesn't work, what could
it be, beside a EOS/coil/mech problem? Would a problem on the pcb not impact
both flippers?

Thanks!

Nicholas
 
if I'm not mistaken on sys11 games the upper flipper gets its power from the bottom flipper, so if the top isn't working and the bottom is, check the wiring and eos-switch at the bottom flipper..

indeed there's a double leaf switch at the flipper button inside the cabinet;. lower should activate a little bit earlier than upper flipper.
a problem on the pcb (bad fuse) usually affects all flippers (or at least all flippers on one side).
 
Back
Top Bottom