Gallag Pinout?

Scucci

Well-known member
Joined
Feb 6, 2003
Messages
4,497
Reaction score
94
Location
Nashville, Tennessee
Does anyone have a good, working Gallag pinout? I'm working my an adapter for my Galaga machine... but the pinouts at CrazyKong.com are wrong... I have video because of the way the boards are I was able to tell immediatly that the CrazyKong pinouts for Gallag are wrong (which they're just calling Galaga bootleg). The video pins are 1 too low, 13 should be 14, 15 should be 14, etc etc. But I don't know how far down the chain that goes or where it starts becuase they're +5 and GND are right... so the ends of the pinout is right, but as best I can tell, everything >4 or <18 isn't 100% right.
 

Damnit... I was just coming back to say I finally (literally JUST found that page)... apparently Google IS my friend with some stuff like this... ... I should put it on my Christmas cards list.

Thank you! Sorry I wasted your time because I doubted the all-powerful Google... ... I've learned my lesson.

Thanks again. :)

Now I know... and knowing is half the battle...
 
Back
Top Bottom