Galaxy Dart Help

Zud

Well-known member
Joined
Jul 19, 2006
Messages
6,702
Reaction score
1,020
Location
Madelia, Minnesota
Does anyone in the area have a working darthead I can borrow? I need to test in my machine as I think I have an issue with mine. I think my mail PCB is ok. I cannot get passed the initialize screen. But if I unplug the "phone" cable between the main board and the darthead and it goes passed the initialize screen and boots up. But of course then the darthead will be recogonized.
 
check for broken off dart tips in the segments and rapidly tap each segment, could be one is just stuck on or something..
 
Figured it out. Screws on the back of the darthead where it attaches to the cabinet were too tight. When they say finger tighten, they mean so as soon as you get a slight resistance STOP.

Now onto another note, does anyone have a working missed dart detector? I do not think mine works. :(
 
Does any one have a missed dart detector? Mine is nont working. I could trade for a modem if I can find the box I have them in. :D
 
Back
Top Bottom