Galaga wiring question

Pimpbot5000

Member
Joined
Aug 13, 2010
Messages
433
Reaction score
12
Location
Alpharetta, Georgia
I'm about to replace the edge connector on my Galaga but I noticed one of the pins has two wires going to it, which doesn't seem right. Pin 7 on the solder side has a yellow/black wire going to it, consistent with the other ground wires, but it also has a yellow/red wire going to it. Is that correct?

galaga_harness.jpg
 
Nothing like trying to take a picture of your wiring harness @ 9:42pm and being scared out of your wits by the neighbor who wondering why your on the side with your head in a arcade machine. Laughs.

Yes, that is normal wiring says the man with two galaga machines..
 
Back
Top Bottom