Galaga harness help...

FlashbaxArcade

Active member
Joined
Jun 2, 2009
Messages
1,521
Reaction score
11
Location
Burleson, Texas
ok this is a dumb question because i have never seen the inside of a Galaga til now. harness is hacked and there was no boardset when i received machine(just the rapid fire pcb).

question is, what plug/molex goes from the boardset to the monitor? i've looked all over this hacked thing and see nothing.....

sorry for the stupidy as i have never jacked with a Galaga before(and don't know how)


p.s. i have a boardset that i tested on a rig several years ago from a buddies rig(hence still don't recognize the harness connections) and i know i need a few custom chips which are 07XX and 51XX. aren't these on Dig Dug/Centipede/Pole Position pcbs too?

thanks in advance
 
The six-pin molex on the Galaga PCB goes to the monitor. It's not surprising that it is missing, as it isn't connected to the rest of the harness. You can get some wire, molex housings, and pins, and make your own if you wish.

Now, if your entire harness is hacked, perhaps it would be best to just buy a complete harness with connectors from Arcadeshop for $45:

http://www.arcadeshop.com/pics/complete-harness.jpg
 
The six-pin molex on the Galaga PCB goes to the monitor. It's not surprising that it is missing, as it isn't connected to the rest of the harness. You can get some wire, molex housings, and pins, and make your own if you wish.

Now, if your entire harness is hacked, perhaps it would be best to just buy a complete harness with connectors from Arcadeshop for $45:

http://www.arcadeshop.com/pics/complete-harness.jpg

ahh...figured i was missin something there! i can make my own just a pain in the ass...

thanks for the info
 
Back
Top Bottom