Galaga Coin Door Help Please *****

irobot

Active member
Joined
Jul 29, 2007
Messages
464
Reaction score
46
Location
Pennsylvania
Can somebody please take some clear photos of the wiring to the test switch, credit button, and anti-tilt switch on their galaga coin door and post them up?

I have the wiring schematic, but I want to make sure I run the wires exactly the way they were before they were hacked and taped.

Hooray for the people who randomly hack wires! This is the third game I've bought with hacked and masking-taped wires.

THANKS
 
I'll try to remember to get some pics when I get home. I hacked the wiring, but only at the plug to support using the same coin door functions from the JAMMA harness so the coin door wiring is pretty much intact.

ken
 
Galaga%20099.jpg
Galaga%20100.jpg
Galaga%20101.jpg
Galaga%20102.jpg
Galaga%20103.jpg
 
colors scheme?

So what is yellow and orange wiring for this coin door? One must me ground and one +5 VDC I'm guessing. What about the rest?

thanks

greg
 
On the coin lights, grey and orange are 12VAC Grey would be the zero point.

You're yellows, YW YR YB & Y, are logic grounds.

White, and White Yellow are for the coin counter

Red +5Vdc

Orange White Center pin of your test toggle switch
Blue is the play side of the test toggle, and on the slam switch
Yellow Goes to the test side of the test switch, other half of slam switch
White Orange Credit button
Orange Green Coin toggle switches
 
Can I be the first person to say - RTFM!!! It's all laid out nice an easy for people who can read English....


:rolleyes:
 
Back
Top Bottom