Galaga Board Problem

buxtonore

Member
Joined
Mar 12, 2010
Messages
144
Reaction score
4
Location
Wixom, Michigan
I just finished installing A Galaga Renewal kit. I replaced all of the sockets, and the SIP Transistors. I rechecked all of my work, and it doesn't look like any traces were pulled off of the board. The board still does not work, and all I get is A white screen, with garbage. Does any one have any idea what could be wrong?
Thanks,
Tony
 
Check around the 4xx and the 2k SRAM on the video board for damage to traces or broken pins on the customs.
 
I just finished installing A Galaga Renewal kit. I replaced all of the sockets, and the SIP Transistors. I rechecked all of my work, and it doesn't look like any traces were pulled off of the board. The board still does not work, and all I get is A white screen, with garbage. Does any one have any idea what could be wrong?
Thanks,
Tony

By doing this you just increased the value and reliability of your board. I have done this to a DEAD board and now it partially boots.
 
Back
Top Bottom