G08 color tracking.. same as 6100?

jetusenet

Well-known member

Donor 4 years: 2011, 2013-2014, 2024
Joined
Feb 26, 2006
Messages
7,234
Reaction score
743
Location
Staten Island, New York
Hi;
Is the set-up of the G08 (tracking) the same as the 6100?

I went through the FAQs and ST manual and cannot find any info on setting it up.

Should I go with setting RGB Drive and Bias fully clockwise like the 6100 and start from there?

Is this information in any manual?

Thanks
Jeff
 
One more try..........

Has no one set the color tracking on a G08!!!!

If I had to guess.......well, hopefully it won't come to that.

Thanks
Jeff
 
My strong point is repairing monitors. My weak point is adjusting them. Short of going through all of the manuals, I would like to see a decent (but somewhat generic) step-by-step for using the bias and drive controls.
 
If you're talking about setting the convergence, then it's the same.

The Sega vector games don't have a good screen for aligning everything. You can jumper over the color signals to get some white color to help with alignment.

K
 
Back
Top Bottom