g07 working great then I..........

tron guy

Super Moderator
Staff member

Donor 12 years: 2011, 2015-2025
Joined
Jun 26, 2007
Messages
23,144
Reaction score
2,591
Location
Eureka, California
was adjusting one of the screen pots, and accidentally poked the screwdriver (metal) though the pot and touched that stupid metal shield that sits behind the pots and the screen went haywire. basically shorted the pot to the metal shield, I believe.

hopefully I just fried a pot? I went and put a new set of pots from Bob in there but haven't got back out there to test it again yet.


certainly my findings will be relevant but I would like some feedback if that doesn't fix it.
 
I've got some messed up screen in screen, or double screen going.

what's the next step?
 
does this sound like a convergance issue? I have never had one before and really don't know what it looks like.
 
adjust the h freq

I did that. It is adjusted as good a possible right now I think.

here are a couple of pics.

the 2nd pic you can see 2 fast freddies where there should only be one. lol
 

Attachments

  • 002.jpg
    002.jpg
    97.9 KB · Views: 24
  • 003.jpg
    003.jpg
    100.3 KB · Views: 28
Last edited:
Back
Top Bottom