G07 - weird issue on startup

chubsta

Member
Joined
Mar 5, 2009
Messages
99
Reaction score
1
Location
Folkestone, Kent, United Kingdom
I have a burgertime cocktail - when i switch it on the screen is garbled like this


img0663qe.jpg



If i then turn the v-line all the way clockwise and then all the way anti-clockwise back to its starting position i get a lovely stable picture like this


img0664tw.jpg



switch the machine off and then back on again and im back to share one! I have had some power issues - the B+ needed reducing from 150 to 120, and also the monitor needed better grounding but even though those problems are fixed this one remains - anyone got any advice o ideas?
 
has it had a cap kit and re-flow of all the headers.

that is a H-Hold issue adjust that pot on the chassis.

Peace
Buffett
 
cheers for the advice guys - i was getting side tracked because when i adjusted the v-hold all the way and then back again it fixed it until the machine was switched off so i thought that was where the problem lied.

i have adjusted the h-hold and it has fixed it now, the image is lovely and clear
 
Back
Top Bottom