g07 upside down pic

tron guy

Super Moderator
Staff member

Donor 12 years: 2011, 2015-2025
Joined
Jun 26, 2007
Messages
23,145
Reaction score
2,593
Location
Eureka, California
which wires do I reverse?

I figure I pull the connector from the yoke to the chassis and reverse the wires?

obviously I need to figure out which ones I am reversing first. I know there has to be a few threads about this.
 
obviously I need to figure out which ones I am reversing first. I know there has to be a few threads about this.

More than a couple. Bob Roberts even has a whole page about it :

http://www.therealbobroberts.net/yoke.html

Basically, you're reversing the polarity of the windings. That'll invert the picture. Some Jamma games even have a DIP switch setting to flip the picture around. Check before messing with the yoke.

-Ian
 
Is the monitor mounted horz or vert?

Andrew

It's a vertical monitor on a vertical frame.

looks like I only reverse brown and grey?

I have been reading bob roberts for the last few minutes before you guys responded
 
It's a vertical monitor on a vertical frame.

looks like I only reverse brown and grey?

I have been reading bob roberts for the last few minutes before you guys responded

If it's upside down, you need to reverse both the horizontal and vertical wires. Just doing one will make the picture backwards (on whichever axis you reverse). Just make sure you don't accidentally mix horizontal and vertical together, you'll mess up the monitor.
 
If it's upside down, you need to reverse both the horizontal and vertical wires. Just doing one will make the picture backwards (on whichever axis you reverse). Just make sure you don't accidentally mix horizontal and vertical together, you'll mess up the monitor.

I learned this the hard way.

but all is well now.

now that I have the g07 in there, I see how horribly wrong the colors were with the eygo chassis. man it was bad.
 
which wires do I reverse?

I figure I pull the connector from the yoke to the chassis and reverse the wires?

obviously I need to figure out which ones I am reversing first. I know there has to be a few threads about this.

Some game boards have a dip switch to set this too...

-Mike
 
Back
Top Bottom