slots
Active member
I just recapped a working G07 chassis and noticed only one end on the big resistor is connected. Also the collector of X304 was cut/broken at the board.
Would there be any reason for this?
I checked the B+ before I removed the chassis and it was at 118 VDC and the B+ pot was turned all the way. Chassis was never removed before I had to cut the glue on the neck board.
Would there be any reason for this?
I checked the B+ before I removed the chassis and it was at 118 VDC and the B+ pot was turned all the way. Chassis was never removed before I had to cut the glue on the neck board.