G07 pin input

Brokenarcade

Member
Joined
Nov 27, 2004
Messages
777
Reaction score
8
Location
Illinois
Hey guys i have what i believe is a g07 in my ms pac. I was wondering if you guys could tell me the pins so i can hook up a 48 in one to it. There are two connectors for the video for the monitor, if you guys could let me know where to hook the colors up to, that would be awesome and save me some time. thanks again
 
Those two connectors are numbered like this when looking at them:

3-pin connector
------------------
321

6-pin connector
-------------------
654321

So, the wires for hooking up a 48-in-1 is as follows:

3-pin connector
---------------
3 - Sync
2 - Sync
1 - Nothing

(hook up the sync from the JAMMA harness to both pins 3 & 2 of the 3-pin connector)

6-pin connector
----------------
6 - Nothing
5 - Nothing
4 - Ground
3 - Blue
2 - Ground
1 - Red
 
Back
Top Bottom