G07 in a street fighter 2- width coil blown? you tell me

I don't think a width coil would cause that. I could be wrong, but I thought if the coil isn't working your picture will be as wide as possible, or small...

Looks more like a sync issue...on my iPhone screen...
 
looks to me like the video is hooked up reverse.

check that it is hooked up correct.

or post some pics of how you have it hooked up.

Peace
Buffett
 
http://imgur.com/2MzzR
http://imgur.com/OgpoV
http://imgur.com/gIK8C

Power to the chassis board is the only thing that looks weird to me, only because its been spliced a couple times. Power to the neckboard is there, controls are there, the ground on the neckboard is present, the magnetic ring is hooked up, power to the monitor is hooked up.

To me it would just seem its needs some tuning with the knobs but I could be wrong. Any help is appreciated.
 
Not exacly sure how to unreverse a picture. Posted pictures of it hooked up everything is connected normally
 
I would do the caps then play around with the adjustments... looks a wee bit dark. If you have the flyback turned up and it is still darker could indicate that some of the caps have gone bad.
 
the colors on the non working chassis are indeed a lot brighter. i have some extra caps so ill see if i can smooth some of these over. this board has had work done on it before as well.


now if i can get the non working chassis to look normal we will be in business!
 
also the neck ground wire goes on the bottom of the neck board.

you have it on the top post and that is wrong.

we need a pic of how the video harness is hooked to the chassis all i saw was the yoke connecter.

Peace
Buffett
 
Back
Top Bottom