G07 Flyback won't come out

SpamManMarc

Member
Joined
Aug 10, 2012
Messages
168
Reaction score
14
Location
Ohio
Anyone have any suggestions on helping get the flyback out of a G07 board. It is being a serious pain and won't get out. Its all that I still need to get out
 
Yep screws removed. Sucked up all the solder I could. Its fighting me still.
 
back before i had my Hakko 808 i used a bulb or sucker and could usually get enough solder up, but sometimes i'd have to resort to using braid to get the last bits.
 
reapply some fresh solder the suck it out, that might loosen up and remove the old solder thats still stuck up there.
 
Took some good ole fashioned sweet talking, but I got it out. Thanks for the ideas
 
Back
Top Bottom