G07 cocktail frame pic needed...

75ohm

New member
Joined
Aug 25, 2008
Messages
344
Reaction score
1
Location
Tampa, Florida
Anyone have an installed w/o glass pic or two they can post? I picked up a G07 horizontal frame and the brackets that came with it for a cocktail installation but something is telling me that these aren't the right ones...

Thanks!
 
Monitor frames for cocktails can be different depending on the cocktail cab it is in. Why not show us pics of your cocktail and frame/brackets you have?
 
75ohm_cocktail_1.jpg


75ohm_cocktail_2.jpg
 
If that's a Galaga-style cab, then the monitor mounts with a special frame from underneath. You CAN use standoffs underneath to mount that frame to it, though...
 
If that's a Galaga-style cab, then the monitor mounts with a special frame from underneath. You CAN use standoffs underneath to mount that frame to it, though...

This is from that pinbo/scramble conversion cab that I was asking about brackets for a while back... the fun never ends...

From the top, you can see 6 screw holes for some sort of bracket that was there...

Thanks for the response, modessitt, much appreciated!
 
This is from that pinbo/scramble conversion cab that I was asking about brackets for a while back... the fun never ends...

From the top, you can see 6 screw holes for some sort of bracket that was there...

Thanks for the response, modessitt, much appreciated!

That may be. I know some cocktails had a special frame with flanges on top for those side screw holes. I have one lying around her somewhere for a 13" that mounted similarly. Good luck finding one...
 
That may be. I know some cocktails had a special frame with flanges on top for those side screw holes. I have one lying around her somewhere for a 13" that mounted similarly. Good luck finding one...

If you wouldn't mind sharing a pic of it, I'd use it to build a bracket system...

Thanks!
 
Back
Top Bottom