I have replaced:
flyback
width coil
105* cap kit (10,000-20,000 hour caps)
105* filter cap
B+ pot
Main chassis pots
2 additional pots for fine-tuning the image
5-neck board color adjustment pots
FR401, C402, R908, plus most of the resistors behind the heat sinks that always look baked, they are out of spec, most of the time in my experience. (R512,R517, R522, R414, R415,R516,R525, etc.)
other small parts as needed.
(the solder blob between pin 1 and 2 of the yoke connector has been removed prior to power up.) nobody else probaby would have noticed.
$215 shipped
SOLD
flyback
width coil
105* cap kit (10,000-20,000 hour caps)
105* filter cap
B+ pot
Main chassis pots
2 additional pots for fine-tuning the image
5-neck board color adjustment pots
FR401, C402, R908, plus most of the resistors behind the heat sinks that always look baked, they are out of spec, most of the time in my experience. (R512,R517, R522, R414, R415,R516,R525, etc.)
other small parts as needed.
(the solder blob between pin 1 and 2 of the yoke connector has been removed prior to power up.) nobody else probaby would have noticed.
$215 shipped
SOLD
Attachments
-
IMG_20251028_204433329_HDR.jpg544.2 KB · Views: 14 -
IMG_20251028_203732209.jpg610.3 KB · Views: 14 -
IMG_20251028_203727413.jpg529.1 KB · Views: 15 -
IMG_20251028_203708664.jpg787.7 KB · Views: 14 -
IMG_20251028_203656688_HDR.jpg585.8 KB · Views: 13 -
IMG_20251028_203645644.jpg664.9 KB · Views: 11 -
IMG_20251028_203639897.jpg607 KB · Views: 14
Last edited:
