SOLD - PARTS G07 cbo rebuilt chassis-norcal (k7000 has sold)

tron guy

Super Moderator
Staff member

Donor 12 years: 2011, 2015-2025
Joined
Jun 26, 2007
Messages
23,150
Reaction score
2,595
Location
Eureka, California
Rating - 100%
383   0   0
I have installed new:
flyback
width coil
105* cap kit (10,000-20,000 hour caps)
105* filter cap
B+ pot
Main chassis pots
2 additional pots for fine-tuniing the image
5-neck board color adjustmtent pots

The section around the heatsinks that always looks cooked, and are almost always out of spec: FR401, R512, R516, R517, R522, R525, R414, R415, C402, R908 other parts as needed.
I also installed a new wire between the neck board and the focus block.

$205 shipped
 

Attachments

  • 20250816_183242.jpg
    20250816_183242.jpg
    597.5 KB · Views: 36
  • 20250816_181116.jpg
    20250816_181116.jpg
    668.4 KB · Views: 40
  • 20250815_200112.jpg
    20250815_200112.jpg
    576.4 KB · Views: 39
  • 20250815_200102.jpg
    20250815_200102.jpg
    547.4 KB · Views: 44
  • 20250815_194834.jpg
    20250815_194834.jpg
    804.7 KB · Views: 46
  • 20250815_194801.jpg
    20250815_194801.jpg
    408.7 KB · Views: 43
  • 20250815_194756.jpg
    20250815_194756.jpg
    455.3 KB · Views: 35
  • 20250815_200123.jpg
    20250815_200123.jpg
    668.1 KB · Views: 32
  • 20250815_200055.jpg
    20250815_200055.jpg
    425.8 KB · Views: 36
Last edited:
Adding a 25" K7000 rebuilt chassis to this thread. SOLD

New
flyback,
105* cap kit (10,000-20,000 hour caps)
voltage regulator
A couple of resistors that were out of spec
C38
Solid reflow
some minor trace repair needed (pretty typical on these)

This one has pots on both the chassis and a remote board. (see pics).

$205 shipped K7000 SOLD
 

Attachments

  • 20250821_162545.jpg
    20250821_162545.jpg
    547.9 KB · Views: 10
  • 20250821_162531.jpg
    20250821_162531.jpg
    419.9 KB · Views: 10
  • 20250821_162527.jpg
    20250821_162527.jpg
    356.4 KB · Views: 9
  • 20250821_161631.jpg
    20250821_161631.jpg
    527.6 KB · Views: 9
  • 20250821_161624.jpg
    20250821_161624.jpg
    582.5 KB · Views: 9
  • 20250821_161618.jpg
    20250821_161618.jpg
    372.3 KB · Views: 9
  • 20250821_161620.jpg
    20250821_161620.jpg
    476.8 KB · Views: 9
  • 20250821_161614.jpg
    20250821_161614.jpg
    515.1 KB · Views: 8
  • 20250821_161611.jpg
    20250821_161611.jpg
    472.2 KB · Views: 10
Last edited:
I've done them for years. It's a pain in the a$$ to test, I have to pull out a street fighter cab, pull the chassis, and drop it in there. Plus.........
there are plenty of other people who do these already, so I just do one here and there. (I do sanyos, 6100s, 4900s 19" k7000, I just don't really want to, except for myself, or locals when I was in Sac).

I'm editing this post, so to not have to many "illegal" bumps in one day:

to add a pic with a 60 in 1 pcb on the 25" monitor. It fills the screen pretty nicely. The SF2 board quit working on me......................
 

Attachments

  • 20250821_173123.jpg
    20250821_173123.jpg
    557.9 KB · Views: 8
Last edited:
Back
Top Bottom