SOLD - PARTS G07 cbo 19" chassis, rebuilt-Norcal

tron guy

Super Moderator
Staff member

Donor 12 years: 2011, 2015-2025
Joined
Jun 26, 2007
Messages
23,145
Reaction score
2,593
Location
Eureka, California
Rating - 100%
383   0   0
FS: rebuilt g07 chassis
I have replaced:

flyback
width coil (and I spend the time necessary to make sure the coil is completely functional. The slug moves from top to bottom).
105* cap kit (10,000-20,000 hour caps)
105* filter cap
B+ pot
Main chassis pots
2 additional pots for fine-tuning the image
5-neck board color adjustment pots
FR401, C402, R908
The section around the heatsinks that always looks cooked, and are almost always out of spec: R512, R516, R517, R522, R525, R414, R415,
other resistors, and transistors as needed specific to this repair.

This will ship double boxed, and highly resilient to damage.

$209 shipped

(the red discoloration in the blue on my test rig is due to other tools sitting right next to it. It is NOT a chassis issue, it needs to be degaussed).
 

Attachments

  • IMG_20251009_101301788.jpg
    IMG_20251009_101301788.jpg
    635.9 KB · Views: 9
  • IMG_20251009_101250245.jpg
    IMG_20251009_101250245.jpg
    792.4 KB · Views: 8
  • IMG_20251009_101239271_HDR.jpg
    IMG_20251009_101239271_HDR.jpg
    512.8 KB · Views: 7
  • IMG_20251009_101231070_HDR.jpg
    IMG_20251009_101231070_HDR.jpg
    634.7 KB · Views: 6
  • IMG_20251009_101210997_HDR.jpg
    IMG_20251009_101210997_HDR.jpg
    642.8 KB · Views: 7
  • IMG_20251009_100648228.jpg
    IMG_20251009_100648228.jpg
    400.8 KB · Views: 8
Last edited:
Back
Top Bottom