G07 Cap Kit

The cap at c518 is a 47 micro 25 volt volt on the 13" and it's 220/25 at the same location on the 19" so there is a bit of a difference. There's one under the chrome cover that's different from the 19" in to but if you have some spare caps kicking around for these two areas, the 19" kit will work for the rest of the chassis
 
Last edited:
Ok thanks Chris, I might try capping everything else and see what I get. what is the one under chrome cover?
 
Last edited:
Here you go...

Electrohome G07-CBO 19"


1uf50V C504
1uf160V C523
3.3uf50V C301/C520 Both BP Caps
3.3uf160V C412
4.7uf50V C408
4.7uf63V C407
10uf50V C303 Positive lead towards PCB edge
10uf250V C107/C905
33uf16V C506
47uf160V C511
100uf6.3V C701
100uf16V C403/C517
100uf160V C411
220uf16V C302/C518
600uf200V C904 B+ Filter Cap
2200uf25V C521


R908 = 47K 1/2W
R317/R314 = 390 ohm 1/4W (orange/white/brown)



Electrohome G07-FBO 13"


1uf50V C504
1uf50V C520 BP Cap
1uf160V C523
3.3uf160V C412
4.7uf50V C408
4.7uf63V C407
10uf50V C301
10uf50V C303 Positive lead towards PCB edge
10uf250V C107/C905
33uf16V C506
47uf16V C518
47uf160V C511
100uf6.3V C701
100uf160V C411
220uf16V C302/C403/C517
600uf200V C904 B+ Filter Cap
2200uf25V C521


R908 = 47K 1/2W
R317/R314 = 390 ohm 1/4W (orange/white/brown)


Edward
 
Back
Top Bottom