G07-CAO Blown Again

mgb

New member
Joined
Apr 22, 2008
Messages
134
Reaction score
1
Location
Connecticut
I recently rebuilt a G07-CAO with a new Flyback, HOT, Fuse and Cap Kit.
The monitor ran fine for a week and is now dead again.
I have not yet been out to look at it. The customer tells me it plays blind.
I figure the fuse probably blew again. The flyback was definately blown before and I replaced it with new.
So anyway I just wonder if anyone has insight or has had a similar issue. I just want to be armed with info before I go back out and check it out.
Thanks
 
i have never seen a shorted poly cap on the g07 could be though.. and you installed the hot correctly with insulator and insulator circular risers? sounds like you did however double check that area.. the hot could have arced to ground from a poor install. b+ 120v and not above?
 
yeah, I had all of the insulators on and it ran for 7 days before blowing again.
I will find out more when I get to the guys house and test it.
 
Back
Top Bottom