G07 303 mod question

Ghostkiller

New member
Joined
Jul 2, 2008
Messages
579
Reaction score
2
Location
Conyers, Georgia
What exactly is this mod? Just noticed in the schematics it showing this but Ive done 2 G07's now and 1 had a cap in the 302 spot now this 2nd G07 appears to have the 303 printed on the board where the schematic shows the 302 should be yet I dont even see a cap over where the 302 should be although the 1st board I did had this. Whats goin on here?
 
OK without searching further and just judging by these 2 boards let me see if I can guess whats going on here. 1st board has a electrolytic cap 2nd has a poly where 303 is, im guessing the 303 mod is using an elctrolytic instead? If so what is the purpose of this?
 
All G07's have a cap at C302 and C303, unless they have been broken off or removed.

The 303 Curl mod has nothing to do with C302 at all physically.
 
All G07's have a cap at C302 and C303, unless they have been broken off or removed.

The 303 Curl mod has nothing to do with C302 at all physically.


So what exactly is the 303 curl mod and what do I need to do to do this mod? Just replace it with a electrolytic cap? If so what uf and voltage?
 
Back
Top Bottom