InstantArcade
New member
I got a new flyback, HOT and capkit from Bob Roberts, but my 13" G07 still won't fire up.
I managed to get a meter on the B+, and it's way high at 165v (should be 120v). The manual says that I should adjust R909, but there isn't on on this chassis. Doesn't look like there ever was one (although I haven't checked the underside).
Can I just throw a regular 2k pot in there, or does the 13" not have an R909?
BTW: I'm measuring the voltage at the back end of the resistor (nearest the tube), since that is the side connected to the regulator and the manual says to test at the emitter of the regulator.
I managed to get a meter on the B+, and it's way high at 165v (should be 120v). The manual says that I should adjust R909, but there isn't on on this chassis. Doesn't look like there ever was one (although I haven't checked the underside).
Can I just throw a regular 2k pot in there, or does the 13" not have an R909?
BTW: I'm measuring the voltage at the back end of the resistor (nearest the tube), since that is the side connected to the regulator and the manual says to test at the emitter of the regulator.
Last edited:
