G05 - 802 Common problems? Tips??

Braido

Well-known member

Donor 2011
Joined
Jul 17, 2009
Messages
4,811
Reaction score
82
Location
California
Hi Guys, i have a Battlezone that i have been restoring with the help of some other KLOV members. Road.runner got me the boards and i can play the game bind but no picture comes up. I fooled around with connectors etc.. nothing to major and was able to get a one white line across the monitor with a bright dot in the middle. Powered it down and fired it back up again and it would still play blind but no picture and this time Nothing, zip.

Any tips on where to start? thx
 
802

Start with reflowing the solder on the headder pins on the deflection pcb and the hv pcb. That might solve the immediate issue. Then go ahead and get a Bob roberts rebuild kit. Also check the large ceramic resistors on the deflection PCB. They are also prone to failure.
 
also pick up two 6800uf 50v caps which don't come with the cap kit rebuild kit for that monitor.
 
Back
Top Bottom