I looked back at my notes and found the issue I ran into was between the 19V2000 and the G05-802. The pin out on the 12 pin input connector is slightly different so I swapped wires on my G05 to accommodate the difference. Basically on the 19V2000 pin 4 is the Z return (gnd) and pin 8 is the...
forums.arcade-museum.com
I'm in need of an adapter harness. Bob's not making any more, I've not seen another commercial seller, I tried to source the parts but am having trouble, and I'd really prefer to just buy a used (or new hand made) one from someone.
To be precise, the Asteroids wiring has a 2x3 .156"(?) female connector and a 1x7 (1.56"?), while the monitor has a 3x4 (.156"?)
I know the monitors might be different voltages, but I tried to check the monitor diodes to determine the input voltage of the monitor, but they are almost rubbed off and impossible to read without removal. Scanning through the forums, I believe I can try the cable first and then consider other options.