Fuse question

ArcadeGameFan

Active member

Donor 2023
Joined
Sep 1, 2023
Messages
148
Reaction score
26
Hi All,

I'm trying to match up some fuses that were blown. The manual shows 6.4 x 30 but I can only find 6 x 30. Will these work? Seems like an oddball size that maybe was available in Japan and not in the US.

Thanks
 

Attachments

  • 4E133DB2-886C-4D93-9C6E-7535FB3E4849.png
    4E133DB2-886C-4D93-9C6E-7535FB3E4849.png
    228.8 KB · Views: 15
6.4 mm is 0.252". -> 1/4".
And 30mm is ~= 1.18" —> 1-1/4".

Standard fuse size.
correct with 6.35mm = 1/4"
31.8mm = 1-1/4"

But those 30mm fuses are a little short,
i had bought what was listed as being 3AG fuse, only to find they shipped 6mm x 30mm
the smaller size may not hold tight in some fuse holders, hence will over heat and burn..
 
Back
Top Bottom