Funhouse plastics locations

seanriddle

Member
Joined
Feb 11, 2010
Messages
92
Reaction score
8
Location
Oklahoma
Is there any definitive guide to where the plastics go in Funhouse? There's nothing in the manual, and when I do an image search, it looks like everyone has things set up a little differently. I figured the flyer might be a good benchmark, but I can't see the whole playfield, and changes were made for production.

There are 5 pieces in a new set that I can't even find on my playfield:

50003-32-SP single green balloon with 1 hole
50003-34-SP clear washer
50003-37-SP smaller popcorn with 1 hole
50003-41-SP clear blob with 1 hole
50003-44-SP clear "mushroom" shape with 3 holes

Any ideas? TIA- Sean
 
Is there any definitive guide to where the plastics go in Funhouse? There's nothing in the manual, and when I do an image search, it looks like everyone has things set up a little differently. I figured the flyer might be a good benchmark, but I can't see the whole playfield, and changes were made for production.

There are 5 pieces in a new set that I can't even find on my playfield:

50003-32-SP single green balloon with 1 hole
50003-34-SP clear washer
50003-37-SP smaller popcorn with 1 hole
50003-41-SP clear blob with 1 hole
50003-44-SP clear "mushroom" shape with 3 holes

Any ideas? TIA- Sean

I don't see any of those mentioned above on mine. :confused:

Here is a high res pic of my playfield. No clue if it's in it's original state or not, but maybe it will help.

I can take other pics tomorrow if you need other details.

http://www.arcaderestoration.com/temp/100_0078.jpg
 
Hey, thanks. I wondered if those were unused, but the packet didn't include the promo plastics, so I don't know why they'd include these. I guess the maker might not know that they are unused. Marco also sells some of these unknown pieces. I thought the clear pieces might be spacers or standoffs, but I don't know where to put them.

I notice you have black rubber rings. Mine are white, and my flipper rubbers are red. Also, the plastic with the red and orange balloons is over the eject hole on my game, not on the tower like yours. I don't notice anything else different. Is there a blue balloon behind the magic mirror?

I know it doesn't matter much, but I figured I'd get things as close as possible to original.

Sean
 
http://ipdb.org/showpic.pl?id=966&picno=8818&zoom=1
Look under the steps ramp - you'll see the green balloon.
Look next to the steps ramp, BEHIND the steps RAIL you'll see the popcorn
Look at the right side of the PF and you'll see the red/orange over the kick out and right next to it the blue balloon.
Look right above the red pop bumper, there you'll see the figure eight shaped blue balloon.
No clue where the circle plastic goes though.
 
Deadly-
The piece under the steps ramp is bigger and has a green balloon on top of a blue balloon and a popped orange balloon.
The popcorn next to the steps ramp is the larger piece.
Most pictures I've seen don't show the blue balloon next to the kickout. Mine was behind the magic mirror, which I thought was odd until I saw AE35's pic of his cut wires and he also had the blue balloon back there.

Here's a picture of all the pieces:
http://i498.photobucket.com/albums/rr348/iko3185/My Pinball Artwork/FunhousePlasticsSet_Complete.jpg

The single green balloon is near the center, the clear washer and blob are center right, the smaller popcorn is lower center, and the clear "mushroom" is upper left.

Thanks-

Sean
 
Back
Top Bottom