Fun Games Inc. BiPlane - Help with measurements

Coindork

Well-known member

Donor 6 years: 2016-2021
Joined
Jun 5, 2016
Messages
4,916
Reaction score
2,022
Location
Cave Creek, Arizona
Can someone that ownes a Fun Games Inc. BiPlane give me measurements of the cab or better yet measurements of the marque and front plexi (bezel).
http://www.arcade-museum.com/game_detail.php?game_id=7098

1039267831.JPG


Im curious how close the dimension of this cab are to a Tank II cab and if the marquee and front bezel would fit into a tank II cab without too much alteration other than maybe a bracket for the marquee etc.

kee-games_tank2_cab_3.jpg


I happen to have a BiPlane PCB as well as a mostly gutted Tank II that does happen to have a mostly populated CP.
 
Ooh, I like where this is going...

Yeah, Joe (HSS) gave me a BiPlane PCB and it actually uses a different connector than Tank II, otherwise I would have just swapped PCBs to play the the different games.
Thats what got me thinking about that empty Tank II cab.
 
Action, Thrills, Fun - Bang, Boom, Pow

Found the marquee and bezel surfing eBay on my lunch break and wound up buying them both.
Not perfect, but nice enough.
Marquee say 27 wide, so ill measure the cab when I get home tonight.
Hopefully these will fit without having to modify much other than a bracket for the marquee.

I dig the cartoon bubbles on the sides :D
BANG, BOOM, POW!!!
Also, dig the fact that they used a blue overlay to simulate the sky on a black and white monitory.
 

Attachments

  • Screen Shot 2017-12-22 at 1.25.09 PM.jpg
    Screen Shot 2017-12-22 at 1.25.09 PM.jpg
    264.4 KB · Views: 13
  • Screen Shot 2017-12-22 at 1.26.48 PM.jpg
    Screen Shot 2017-12-22 at 1.26.48 PM.jpg
    165.8 KB · Views: 9
Back
Top Bottom