We have a full court frenzy 2 that we had got from another vender. It was in shambles. Missing most everything. We have replaced the mother board, all the sensors, decals. linear movement has found home and is not a problem. rotational however will can't find home. new decals were installed new sensor, new cable snake motors work as well the gear boxes. there is a groove where the rotation wheels ride. i do get voltage variations as the rotation platter moves. sometimes i get three 5volt or two .21volt and one 5volt. or two 5 volt and one .21 volt or all three .21 volt from the logic pins on the mobo depending where the decal stopps over the opto. i did oil the rotational wheels and greased the linear gear. in test mode there is a point where the display stops reading during motion. same place everytime.
we have been working on this game for over a month. ICE has been going over it with us step by step.
any input would help.
Thanks
we have been working on this game for over a month. ICE has been going over it with us step by step.
any input would help.
Thanks
