FT Wico Centering Grommet

bstnguy

Well-known member
Joined
Jan 30, 2008
Messages
1,812
Reaction score
36
Location
Boston, Massachusetts
Rating - 99.3%
136   1   0
FS Wico Centering Grommet

Got a centering grommet from Bob Roberts and it's the wrong shaft size.

It's a 1/4" DIA, and I need the bigger one.

$12 shipped in the US

Thanks
 
Last edited:
Is this a Wico or a Midway? I only see the Midway grommets on Bob's site. Could be my old age messing with me though. :D
 
Will this work with a Dig Dug cocktail cabinet? I'm looking for a 4-way centering grommet for a loose stick.
 
I bought those a few months ago and they work on the 3/8" diameter shafts. The little CTs (not sure about cabarets) use 1/4" shafts. So measure you shaft before you slap a grommet on it.
 
I bought those a few months ago and they work on the 3/8" diameter shafts. The little CTs (not sure about cabarets) use 1/4" shafts. So measure you shaft before you slap a grommet on it.

Ooops, sorry. I was going by the manual, it lists all three cabinets as using the same joystick. I know the upright uses the 3/8"....I've never had a cocktail.

Edward
 
The post says those are great for Robotron which is an 8-way. Wouldn't that be problematic?

The grommet has nothing to do with that....the grommet is the same...8-way, 4-way, 2-way....no difference.

What gives it the "direction" is the actuator and the base indent.
Edward
 
Last edited:
Back
Top Bottom