FS: Working WG K6100 Deflection and Neckboard

ArcRevival

Well-known member
Joined
Aug 31, 2006
Messages
10,147
Reaction score
1,099
Location
RAPID CITY, South Dakota
Rating - 100%
47   0   0
I have a tested and working WG K6100 Deflection and neck board. The deflection board has new caps and all new components in the low voltage section( except for Q101) and all of the header pins resoldered. The neckboard has a new cap and lots of fresh solder on most of it and has had all the harness wires removed and resoldered. I would like to sell them as a set but will break it up if I get no takers for both. Both of these are in nice shape. Pics available.

$165 for the set shipped.

or

$125 shipped for the deflection board

and

$60 shipped for the neckboard.

Prices are continental US only.
 
Last edited:
P1040384.jpg

P1040381.jpg

P1040391.jpg

P1040387.jpg


Pics aren't the best but gives an idea. I have the cardboard cover for the back of the neck board, just need to put it back on.
 
Set is being broken up. Deflection board is sold. Neck board still available.

I also have another working deflection board that has original capacitors on it and is in nice shape. I have not done any work to this board at all. This one would be a great candidate for a rebuild.

shipped in continental US for $100 o.b.o
 
Neck board is SOLD

Still have the deflection board, working with original capacitors and in nice shape , great candidate for rebuild.
$100 shipped or best offer...
 
Back
Top Bottom