FS: Working POWER SUPPLIES $7 Each - TNT Amusements

Todd Tuckey

Well-known member

Donor 2019
Joined
Mar 22, 2008
Messages
4,944
Reaction score
618
Location
Southampton, Pennsylvania
Rating - 100%
136   0   0
FS: Working POWER SUPPLIES $7 Each - TNT Amusements

Get them BEFORE Ebay!! Take your pick $7 each!!! All are tested and working fine---pulled from games we resell--our policy is to instal a new power supply on all our games....we have sold well over 500 of these power supplies now--many to Newsgroupers right ehre, the rest on GreedBay (for more!!) I ship UPS....and can ship multiples cheaply...
EMAIL TO ME DIRECTLY for fastest response! [email protected] All $7 each!!

I have 8 Megatouch XL style power supplies (first pix)

Larger 9 pin PS--used in Neo Geo, etc...One rectangular and one square, and another square with the 9 pin connector cut off (you can splice one back on from your bad one!) (second pix)

Screw Terminal power supplies---I have 5 with three voltages--standard. I also have one that is 12 volts only but at 12 amps, and one thats 24 volts at 5 amps (from a dance machines) (third pix)

Megatouch hard drive Max--Dianmond-Ruby-etc---with SINGLE 24 pin power plug (also used in some golden tees) 3 available (fourth pix)

ATX style/also megatouch and other games, including Godlen Tee Fore series--with 24 pin plug and other conenctors (fifth pix)

JUST THINK!! $7 each for a working power supply!!! Todd from TNT Amusements
 

Attachments

  • Picture 1012.jpg
    Picture 1012.jpg
    93 KB · Views: 77
  • Picture 1016.jpg
    Picture 1016.jpg
    95.3 KB · Views: 107
  • Picture 1013.jpg
    Picture 1013.jpg
    93 KB · Views: 112
  • Picture 1014.jpg
    Picture 1014.jpg
    92.4 KB · Views: 75
  • Picture 1017.jpg
    Picture 1017.jpg
    91.8 KB · Views: 66
update--as of midnight, second pix is sold out..also all the standard 3 voltage screw terminal ones sold...but still have the 12 and 24 volt screw terminal PS...all others still here...Todd
 
todd let me know if you have a cheap working one that will plug into a 25" corner cut dynamo
 
never had 8-liners in our building...pretty much any of these power supplies will work fine...the megatouch XL supplies have a fan and good amperage for the three voltages...just need to configure them for your game...
I know certain games do not have the same connectors...when we run into that, we attempt to put a common connector inside the game, so when the new power supply we are installing now eventually fails, smeone will easily be able to change it out. Todd
 
todd i need one from a 25" corner cut dynamo!

Are you talking about a Peter Chou AT power supply that has the on/off button? I might need to pick up one of those as well for my Police Trainer dynamo cab. The fan is really loud...thinking it might be trying to die on me.
 
Back
Top Bottom