FS: Tron PCB & Arcadeshop MCR PSU converter UNTESTED

Kid Raster

Well-known member
Joined
Sep 25, 2006
Messages
762
Reaction score
405
Location
Tulsa, Oklahoma
Rating - 100%
15   0   0
FS: Tron PCB & Arcadeshop MCR PSU converter UNTESTED

I don't own a Tron machine and have no harness.
Board is fully populated and has new ribbon cables from Bob Roberts. They were 22$.
Arcadeshop MCR power converter is brand new. It was 70$ or so.
Never got around to building the Tron cab, now it just sits on the shelf. Maybe it can help one of you.

Northeast Oklahoma.

120$ for the whole package, you handle shipping.
 

Attachments

  • IMG00058.jpg
    IMG00058.jpg
    95.5 KB · Views: 7
  • IMG00059.jpg
    IMG00059.jpg
    96.4 KB · Views: 7
  • IMG00061.jpg
    IMG00061.jpg
    96.6 KB · Views: 8
  • IMG00065.jpg
    IMG00065.jpg
    94.2 KB · Views: 15
Last edited:
Thanks for the PM's everyone. As I have previously stated, this set is UNTESTED. It may work, it may not. I do not own an MCR machine, have no way of testing it and simply have no clue. I bought it in a lot of PCBs over a year and a half ago, and almost all of them worked. In fact, 3 others from that same lot I have listed right now worked 100% when I tested them in other cabs (Jr Pac, Hyper Sports, Yie-Ar Kung Fu) I had plans to build a Tron cabinet using plans (hence the arcadeshop MCR purchase) and use a switcher, but this project is no longer going to happen, as the artwork is completely outrageous an so on. Repairing the boards refers to my purchase of brand new MCR ribbon cables for the board that are also included. I never went so far as to acquire a harness or any other parts for this project. I'm just trying to drum up a little money to get my hands on a UMK3 board.

Hope that clears up a few questions.
 
Back
Top Bottom