FS: Timber

flynn54321

Well-known member
Joined
Jan 13, 2008
Messages
6,244
Reaction score
176
Location
GREEN BAY, Wisconsin
Rating - 100%
152   0   1
Selling a very nice Timber machine.
Machine is MISSING the board... everything else is there - suitcase, MCR PS Board, Dual Sound Amp, etc. Just the main board is missing.
Game is in excellent shape - no water damage. Bezel is bright and nice - marquee is probably the best I have ever seen.
Monitor has neck glow - and little if any burn...
CPO isnt bad - but does have some tears along the front edge. Main wiring harness is beautiful... but the coin door wiring is screwed up (NOT THE MAIN HARNESS - just on the door itself - molex connector is there from main harness)
Missing the smoked bezel... I'm guessing someone replaced the monitor and forgot to put it back on. Complete with back door etc.
The last one of these that I put up for sale wasnt nearly as nice as this one and it sold in 18 minutes. Game is located in Green Bay, WI
Not looking for trades unless its something really cool.

$650
 

Attachments

  • DSC03869.jpg
    DSC03869.jpg
    95.1 KB · Views: 124
  • DSC03870.jpg
    DSC03870.jpg
    86.7 KB · Views: 109
  • DSC03871.jpg
    DSC03871.jpg
    71.4 KB · Views: 94
  • DSC03872.jpg
    DSC03872.jpg
    95.4 KB · Views: 98
  • DSC03875.jpg
    DSC03875.jpg
    75.3 KB · Views: 75
Last edited:
Timber boardset would rough to find. Probably be easier just finding a Tapper board or comparable, and burning the roms.

If this doesnt go all in one piece, you could easily part the thing. Mine could use a better bezel and cab for that matter, but the rest is great. Id be willing to take those two things, hell even the monitor if there isnt much burn.
 
Timber boardset would rough to find. Probably be easier just finding a Tapper board or comparable, and burning the roms.

If this doesnt go all in one piece, you could easily part the thing. Mine could use a better bezel and cab for that matter, but the rest is great. Id be willing to take those two things, hell even the monitor if there isnt much burn.

Yeah this thing is way too nice to part out....
That's probably the best way to go about getting a board - take a tapper board and make it into a timber - pretty easy.

All PM's have been replied to
 
Yeah this thing is way too nice to part out....
That's probably the best way to go about getting a board - take a tapper board and make it into a timber - pretty easy.

Actually I think timber is like mcr II and tapper is mcr III IIRC or the other way around. at any rate if memory serves a tron board would be a better candidate to become a timber via rom swap than a tapper.
 
Dude your killing me...that is three games in 2 months that I wanted, were well priced and you're close...if only I had the room.

I gotta finish my basement this summer for sure!
 
Actually I think timber is like mcr II and tapper is mcr III IIRC or the other way around. at any rate if memory serves a tron board would be a better candidate to become a timber via rom swap than a tapper.

Timber and Tapper are both MCR III. The MCR FAQ says that Timber is MCR 2(which is wrong) , and I think that causes confusion. You can tranform a Tapper PCB into Timber via ROM swap...I did it not too long ago.
 
More pics... the original pics I took were a bit dark because the sun was going down... Here are some daytime pics
 

Attachments

  • DSC03920.jpg
    DSC03920.jpg
    86 KB · Views: 27
  • DSC03918.jpg
    DSC03918.jpg
    98.5 KB · Views: 28
  • DSC03919.jpg
    DSC03919.jpg
    85.9 KB · Views: 24
  • DSC03923.jpg
    DSC03923.jpg
    92.5 KB · Views: 26
  • DSC03921.jpg
    DSC03921.jpg
    79 KB · Views: 20
Back
Top Bottom