FS Parts: FS: Taito/ Jungle King Stuff/ Partial Kit

Phetishboy

Well-known member
Joined
Dec 12, 2006
Messages
47,928
Reaction score
9,391
Location
Avon, Minnesota
Rating - 100%
114   0   0
Hey guys, decided that I am never going to finish some of these projects if I don't start culling the herd. I am selling off my last Taito cabinet to someone local and will have no further use for the following parts, so they are up for sale as a whole or in pieces. If you are restoring or planning to restore a Jungle King, save yourself the time and buy most of what you'll need here. Save on shipping if you buy it all at once.

Nice Original Jungle King Plexi Marquee - $25 shipped
TOG Silk Screened Jungle King CPO - $50 shipped
Gamestencils Taito Stencil set (including the Taito copyright stickers) - $65 shipped
Arcadeshop switcher adapter and (used but working) switcher - $40 shipped
Recently serviced and stored working Jungle King PCB - $90 shipped

Or take everything listed for $225 shipped. Pics upon request.
 
Interested in everything but the PCB. Would you sell the marquee, cpo, stencil set and switcher/adapter as a set?
 
Marquee Pics. There are some surface scratches that I could not get out after 3 Novus 2 treatments. I would be happy to use this on my game, but I know how anal some of you are. You can feel one of the scratches with your fingernail, just so you know.
P2140031.jpg

P2140030.jpg

P2140033.jpg

P2140032.jpg

P2140023.jpg
 
The surface scratches I am talking about are on the front side. This also comes with the original black plastic marquee trim, as you can see. Here are close ups of the 2 or 3 imperfections in the screened graphic:

P2140027.jpg

P2140028.jpg

P2140026.jpg

P2140025.jpg


Otherwise the back looks really good NOT PERFECT, but good. The best part is that this is screened on plexi, so no bubbling or peeling to worry about. Just scratches.
 
Interested in everything but the PCB. Would you sell the marquee, cpo, stencil set and switcher/adapter as a set?

Looks like the marquee is sold. If you want the other 3 items you mentioned, $145 shipped should cover it. paypal is phetishboy at hotmail dot com .

If not, I have a buyer for the stencils and the switcher kit, so let me know.
 
Marquee is sold.

Stencils, Screened CPO and Switcher Kit on hold til 5pm today.

PCB is still for sale at $90 shipped. It was repaired, tested, working then put into an antistatic bag and then a box for safekeeping. I haven't touched it since. These always seem to have Ram errors, so here's one that shouldn't have any. I paid $75 for it, then $50 to have it fixed, plus shipping 3x over.

I also found the original back lit black/orange instruction decal for the bezel. It has a few light wrinkles but otherwise has no scratches or tears. I will throw that in for whoever buys the CPO.
 
It's on my Taito multi which will have to do due to my severe space limitations. I was more telling Phetty that he should have culled something else.

Well there was a local (kinda) boy looking for a Taito cab and I answered his call. The cab needs work, re-stencilling, etc and he is willing to take it as is, which is nice. Here is the cab:

DSC01014.jpg


I am in the process of cleaning and streamlining my shop, and at least 5 projects need to go in order for me to finish the other 6 comfortably. This was an easy one to let go.
 
Pics of the screened overlay and instruction decal (the wrinkles are from the heat of the original 44 bulbs). The material is like a strong translucent vinyl and would be easily flattened with heat. It's in very good shape other than the obvious wrinkles. The overlay is TOG's repro and very nice.

DSC01020.jpg

DSC01021.jpg

DSC01019.jpg
 
Back
Top Bottom