FS Parts: FS: Summer clean out! PCB, chassis, various.......

lutus

Member
Joined
Aug 10, 2006
Messages
543
Reaction score
5
Location
Florida
Rating - 100%
5   0   0
FS: Summer clean out! PCB, chassis, various.......

Summer clean out in progress. Respond to this main thread FIRST before sending a PM. I will let the forum decide who is 'first come first served'. I do have pics available but for the most part this stuff is cut and dry. All prices include shipping and some will include various goodies thrown in as a surprise.

DK3 pcb. Missing a chip, no battery acid damage $30 SOLD
3" inch Happ trackball, red boards, white ball, black powder coat mount, brand new $50 SOLD
Missile command upright marquee with speakers $30
Nintendo small inverter board (has some weird pots installed) $15
iPac 2 (PS2, old design) working $20 SOLD
Turbo Twist (original) never used, new $40 SOLD
ActLabs light gun, USB, original cartoony design $35 SOLD
K7000 monitor chassis (capped, been a while since tested, assume functional) $35 SOLD
K7000 monitor chassis (not capped, assume non-working) $25 SOLD
Unknown monitor chassis (will upload pic) $25

Midway Space Invaders stuff:
Wiring harness (complete or near complete) $25
Moon and attached mounting bar/light holder $25
1 way mirror $40 (mostly shipping)

Thanks for looking!

Clay
 

Attachments

  • MC-marquee-front.jpg
    MC-marquee-front.jpg
    8 KB · Views: 12
  • MC-marquee-back.jpg
    MC-marquee-back.jpg
    6.2 KB · Views: 8
  • trackball-side.jpg
    trackball-side.jpg
    9.1 KB · Views: 9
  • Trackball-top.jpg
    Trackball-top.jpg
    7.5 KB · Views: 10
  • unknown-chassis.jpg
    unknown-chassis.jpg
    9.7 KB · Views: 9
Last edited:
The DK3 pcb is missing a chip that can be seen in the pics.
 

Attachments

  • IMG_0346-resized.jpg
    IMG_0346-resized.jpg
    46.3 KB · Views: 21
  • IMG_0347-resized.jpg
    IMG_0347-resized.jpg
    51.8 KB · Views: 20
Does the inverter board work? Since you posted wierd pots are installed I just want to make sure.
 
I believe it did work last time I had it installed. I installed the pots with what I had laying around. The resistance values on the trim pots are 5K ohm. See pic.
 

Attachments

  • NintendoInverter.jpg
    NintendoInverter.jpg
    16.9 KB · Views: 8
Back
Top Bottom