heffe2001
New member
Figured I'd post there here before going to craigslist:
1 - Stargate, fair to good condition (some chipping along bottom edges, and typical wear, a burn or 2 on the CP, but a new overlay would fix it right up). Monitor is bright and clear (fresh rebuild). Has a switching power supply, so could use the CMOS fix/upgrade, but works fine otherwise. I'll get some additional pictures when I get off work tonight. 200.00 firm SOLD
2 - MS Pac cabinet w/ArcadeSD board installed. Brand new monitor (well, about a year old now, I'd guess less than 20 hours on it total), new 8-way/4-way selectable stick, new leaf/switch buttons (like a leaf, but actually a switch), multicade header, overlay and monitor plexi. Cabinet was painted fresh when I purchased it, and pretty clean as the cabinets go. The coin door isn't perfect (it's a bit bent, looks like someone pried it open once upon a time), and the monitor needs a new surround (I think I still have one here, if I do I'll include it). Machine works perfectly, still has the MS Pac wiring, I'm using a Pac2Jamma adapter. Asking 450.00 firm.
Machines located in Conover, NC. Any questions or additional pictures, just ask. I also don't ship, so I'd prefer local, or you arrange shipping (If you do arrange shipping, I can have these accessible at my work address, with dock-height access). I could possibly meet halfway for anyone near me depending on distance.
**EDIT** And before anybody else decides to low-ball, don't make me an offer, and when I accept it and give you the payment info, ask a bunch of questions (most of which are answered in this ad), ask for a ton o fictures then disappear, THEN come back when I lower the price to what you offered and offer half what you offered the first time around. Either go with the price you agreed upon, or not...
2 - MS Pac cabinet w/ArcadeSD board installed. Brand new monitor (well, about a year old now, I'd guess less than 20 hours on it total), new 8-way/4-way selectable stick, new leaf/switch buttons (like a leaf, but actually a switch), multicade header, overlay and monitor plexi. Cabinet was painted fresh when I purchased it, and pretty clean as the cabinets go. The coin door isn't perfect (it's a bit bent, looks like someone pried it open once upon a time), and the monitor needs a new surround (I think I still have one here, if I do I'll include it). Machine works perfectly, still has the MS Pac wiring, I'm using a Pac2Jamma adapter. Asking 450.00 firm.
Machines located in Conover, NC. Any questions or additional pictures, just ask. I also don't ship, so I'd prefer local, or you arrange shipping (If you do arrange shipping, I can have these accessible at my work address, with dock-height access). I could possibly meet halfway for anyone near me depending on distance.
**EDIT** And before anybody else decides to low-ball, don't make me an offer, and when I accept it and give you the payment info, ask a bunch of questions (most of which are answered in this ad), ask for a ton o fictures then disappear, THEN come back when I lower the price to what you offered and offer half what you offered the first time around. Either go with the price you agreed upon, or not...
Attachments
Last edited: