mrbill2084
Well-known member
I finally got around to taking pics of my star wars cockpit. I think its in very good shape. Has 2 scratches and 1 ding to the art. Plexi is good. Its working 100%(well, the rear light is out right now). It has the 25" amp tube in it, but its running on wells hardware. I should have all the parts to switch it back, but I woulld need to test the deflection board and replace the red flyback.
Its pretty dirty as its been sitting in my friends garage since '95.. here are some pics. I was thinking $3k with the monitor using the wells parts. $3300 I will include a dead(complete) amp HV pcb and a dead(complete) amp deflection pcb (lets say $3400 with a tested working deflection pcb). and $3500 with it swapped to working amp parts(I keep the wells parts).
Keep in mind this had a light cleaning for the pics and has 15 years of cleaning to get off it.. I forgot to take screen shots but it was working(had a little jitter and yoke center was a bit off). The yoke overlay had a little wear But I have an NOS replacement it.
http://i215.photobucket.com/albums/cc188/mrbill2084/side1-66.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/side1front.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/side1back.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/dingside1-1.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/side2-49.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/side2back.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/side2bottom.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/side2middle.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/scratchside2big.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/scratchside2.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/back-22.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/boards-1.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/controls-12.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/seat.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/top-10.jpg
I also have an esb kit if thats of any interest to anyone. I have an esb pcb, nos esb marquee, a 2nd applied esb marquee, 1 nos side art sticker and an nos yoke overlay. I would have to re-test the pcb, but it worked last time I plugged it in and its been stored in its own rf cage.
You can have choice of marquees. As for a price, I was thinking $600 Here are the pics. If you need it, I should have a blank yoke cover for the overlay.
http://i215.photobucket.com/albums/cc188/mrbill2084/marquee6-1.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/marquee5.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/marquee-12.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/marquee0.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/yoke2.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/yoke1-1.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/side2-52.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/esbboard2.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/esbboard.jpg
Its pretty dirty as its been sitting in my friends garage since '95.. here are some pics. I was thinking $3k with the monitor using the wells parts. $3300 I will include a dead(complete) amp HV pcb and a dead(complete) amp deflection pcb (lets say $3400 with a tested working deflection pcb). and $3500 with it swapped to working amp parts(I keep the wells parts).
Keep in mind this had a light cleaning for the pics and has 15 years of cleaning to get off it.. I forgot to take screen shots but it was working(had a little jitter and yoke center was a bit off). The yoke overlay had a little wear But I have an NOS replacement it.
http://i215.photobucket.com/albums/cc188/mrbill2084/side1-66.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/side1front.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/side1back.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/dingside1-1.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/side2-49.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/side2back.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/side2bottom.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/side2middle.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/scratchside2big.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/scratchside2.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/back-22.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/boards-1.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/controls-12.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/seat.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/top-10.jpg
I also have an esb kit if thats of any interest to anyone. I have an esb pcb, nos esb marquee, a 2nd applied esb marquee, 1 nos side art sticker and an nos yoke overlay. I would have to re-test the pcb, but it worked last time I plugged it in and its been stored in its own rf cage.
You can have choice of marquees. As for a price, I was thinking $600 Here are the pics. If you need it, I should have a blank yoke cover for the overlay.
http://i215.photobucket.com/albums/cc188/mrbill2084/marquee6-1.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/marquee5.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/marquee-12.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/marquee0.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/yoke2.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/yoke1-1.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/side2-52.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/esbboard2.jpg
http://i215.photobucket.com/albums/cc188/mrbill2084/esbboard.jpg
Last edited:
