FS: Some cabs in UK (Atari/Midway/Taito)

Backflipper

Member
Joined
Jun 5, 2007
Messages
104
Reaction score
4
Location
Surrey, United Kingdom
Rating - 0%
0   0   0
Hello All,

Super breakout (Atari)
- Working and in very tidy condition
- I have a few spares including a motorola chassis
- Bezel and control panel.
If someone needs the spares for a restoration let me know.

Double Dragon (Taito)
- Fully working
- The CRT does have some burn but it is of double dragon
- The side art is coming away in a corner near the control panel
- The back door is missing
This is a cool jamma cabinet as you can access the PCB from the front draw.

Lunar Lander (Atari)
- This has a PCB fault. It works for about 10 seconds then it glitches.
- The back door has had section cutout
I can get the PCB fixed if it means I would gain an extra £150
** I think Phill put an offer in on this so PM me Phil is you are still keen

Spike (Atari)
- This was working but was tripping Ravs electric
- The cabinet was dropped when Oll imported it so it does need some work.
This was the next evolution of Pong so an early cabinet.

Clowns (Midway)
- This has a PCB fault which I believe is the connector joining the 2 pcbs together
- I have repaired the monitor, loom, replaced the control panel.
- The kick plate art has been painted over but I have the vector art file Rav created so it can be reprinted.

Gravitar (Atari)
- Fully working.
- This cabinet is in great condition.
- I have a black widow control panel (No sticks) and a PCB (Unkown condition)
- Full manual set.

ABI incircuit tester
- Fully working
- Needs the probes made up. (I will supply a 40pin clip on connector)
This is the same as the one Macro sold recently

If anyone is near Hertford and wants to come and take a look they are more than welcome.

Cheers
 
Back
Top Bottom