pmWolf
New member
FS: Several games. Star Wars Trilogy (project), House of the Dead + lots more.
Games are located in Union City, MI. Email me at [email protected] if you want a quick response.
Working:
*********************
House of the Dead (Deluxe): $650
Lightning Pinball (Stern): $650
Super Hang-On: $250
Love Tester/Mystic Lady - Combo fortune teller and love tester. $200
Project-ish:
*********************
Tekken 4: Big, big 33" showcase cab. Not really a project, but I haven't tested it enough to claim that it is perfectly working. Monitor works, and looks good. Game PCB and disc appear to work fine. Cab is in two pieces, and I have yet to attach the control panel section. It looks nice and clean, and has a Dollar Bill Acceptor. My assumption is that it works fine. $600 OBO
Silent Scope x 2: There are TWO of these. One of them comes apart in two pieces, and the other one is a completely solid unit. I have no idea what works, or what doesn't on these. I know that one is missing the monitor chassis, both have their guns, both have their PCB's. Both APPEAR complete. Take both for $500. (Dear Lord! The parts are worth far more than that!!)
Star Wars Trilogy – Dedicated. Missing the monitor chassis. I pulled the flight stick out and PCB in order to test things. I am 100% sure that the game PCB works. The flight stick will need a pot replaced. There is some other part of it that was failing….perhaps the power supply. I no longer have the other two Star Wars Trilogy games that I had….so I haven't been able to do any more troubleshooting. (Again, I DID test the game PCB, and that worked fine). Cabinet is dedicated, and in decent shape. Complete (other than the aforementioned monitor chassis). $350 OBO.
Sharp-Shooter - Nice, 25" cabinet. Game worked until recently when the monitor decided to quit. Game PCB works, gun works, haven't looked at the monitor yet to see what the issue is. $200.
House of the Dead 2 (x2) – Would like these to go as a pair. BOTH have working game PCB's and both have working monitors. Both boot and go into attraction mode with no problems. One monitor is excellent, and the other could use a cap kit (but is still okay). One of them is missing a gun PCB (if my memory is correct), and there is a busted gun. Between the two of them, there are two complete guns. You will need to do some part swapping to get a perfectly working machine, and you'll need to buy a couple extra parts if you want both to work. $675 as a pair.
Big Buck Hunter – Bad monitor. The PCB works (you can hear it play blind). I believe it will need a new power supply, since you can hear the game reset and reboot frequently (I don't think it is supplying a constant +5v). The shotgun is not attached, but I have it. Former Lethal Enforcers cabinet (I think) painted black. $200 as-is.
Crisis Zone – Works, boots, plays. Monitor could stand to be a bit brighter. Gun aims and shoots just fine. Pedal works. Gun motor is weeeeeeeeeak. You can hear it trying, but it just isn't rat-a-tatting effectively. Cabinet looks great. $325.
Tekken 3 – PCB works, monitor does not. Looks nice, and is a good 25" cabinet. I've done zero troubleshooting on it. $175
Area 51: Site 4 – Game PCB works 100%. Guns work. Monitor is fine. Game boots and works fine, but constantly resets. The power supply is not giving a consistent +5v, and needs to be replaced (at least, that would be my diagnosis based on everything else I've tested). Former Lethal enforcers cab, converted nicely with sideart stickers. $275
Super-Projects/Cabs:
***********************
Police Trainer – Big, 25" cabinet. Monitor tube is there, but no monitor chassis. No PCB. Wired for Jamma, and has one gun still attached. Very, very large. Would probably make a sweet MAME. $40.
Operation Wolf 3: Cabinet looks great. Guns are both there, and look fine. 25" monitor tube is there...chassis is not. No PCB. $100
Operation Thunderbolt: Complete. Dedicated. Non-working. Filthy. $75
Outrun: No PCB. Filthy. Monitor is out, but will go with the game. $50
*****************************
Not looking to part things out at the moment. Need the space.
I'd be willing to discuss trades, particularly for stuff involving pinball machines.
Thanks for looking!
Pete Mathis
[email protected]
517-741-7234
Games are located in Union City, MI. Email me at [email protected] if you want a quick response.
Working:
*********************
House of the Dead (Deluxe): $650
Lightning Pinball (Stern): $650
Super Hang-On: $250
Love Tester/Mystic Lady - Combo fortune teller and love tester. $200
Project-ish:
*********************
Tekken 4: Big, big 33" showcase cab. Not really a project, but I haven't tested it enough to claim that it is perfectly working. Monitor works, and looks good. Game PCB and disc appear to work fine. Cab is in two pieces, and I have yet to attach the control panel section. It looks nice and clean, and has a Dollar Bill Acceptor. My assumption is that it works fine. $600 OBO
Silent Scope x 2: There are TWO of these. One of them comes apart in two pieces, and the other one is a completely solid unit. I have no idea what works, or what doesn't on these. I know that one is missing the monitor chassis, both have their guns, both have their PCB's. Both APPEAR complete. Take both for $500. (Dear Lord! The parts are worth far more than that!!)
Star Wars Trilogy – Dedicated. Missing the monitor chassis. I pulled the flight stick out and PCB in order to test things. I am 100% sure that the game PCB works. The flight stick will need a pot replaced. There is some other part of it that was failing….perhaps the power supply. I no longer have the other two Star Wars Trilogy games that I had….so I haven't been able to do any more troubleshooting. (Again, I DID test the game PCB, and that worked fine). Cabinet is dedicated, and in decent shape. Complete (other than the aforementioned monitor chassis). $350 OBO.
Sharp-Shooter - Nice, 25" cabinet. Game worked until recently when the monitor decided to quit. Game PCB works, gun works, haven't looked at the monitor yet to see what the issue is. $200.
House of the Dead 2 (x2) – Would like these to go as a pair. BOTH have working game PCB's and both have working monitors. Both boot and go into attraction mode with no problems. One monitor is excellent, and the other could use a cap kit (but is still okay). One of them is missing a gun PCB (if my memory is correct), and there is a busted gun. Between the two of them, there are two complete guns. You will need to do some part swapping to get a perfectly working machine, and you'll need to buy a couple extra parts if you want both to work. $675 as a pair.
Big Buck Hunter – Bad monitor. The PCB works (you can hear it play blind). I believe it will need a new power supply, since you can hear the game reset and reboot frequently (I don't think it is supplying a constant +5v). The shotgun is not attached, but I have it. Former Lethal Enforcers cabinet (I think) painted black. $200 as-is.
Crisis Zone – Works, boots, plays. Monitor could stand to be a bit brighter. Gun aims and shoots just fine. Pedal works. Gun motor is weeeeeeeeeak. You can hear it trying, but it just isn't rat-a-tatting effectively. Cabinet looks great. $325.
Tekken 3 – PCB works, monitor does not. Looks nice, and is a good 25" cabinet. I've done zero troubleshooting on it. $175
Area 51: Site 4 – Game PCB works 100%. Guns work. Monitor is fine. Game boots and works fine, but constantly resets. The power supply is not giving a consistent +5v, and needs to be replaced (at least, that would be my diagnosis based on everything else I've tested). Former Lethal enforcers cab, converted nicely with sideart stickers. $275
Super-Projects/Cabs:
***********************
Police Trainer – Big, 25" cabinet. Monitor tube is there, but no monitor chassis. No PCB. Wired for Jamma, and has one gun still attached. Very, very large. Would probably make a sweet MAME. $40.
Operation Wolf 3: Cabinet looks great. Guns are both there, and look fine. 25" monitor tube is there...chassis is not. No PCB. $100
Operation Thunderbolt: Complete. Dedicated. Non-working. Filthy. $75
Outrun: No PCB. Filthy. Monitor is out, but will go with the game. $50
*****************************
Not looking to part things out at the moment. Need the space.
I'd be willing to discuss trades, particularly for stuff involving pinball machines.
Thanks for looking!
Pete Mathis
[email protected]
517-741-7234
Attachments
Last edited: