FS: Reproduction Atari Dust Discs (several different type)

Daviea

Permanently Banned - See: Ram Controls Forum Secti
Joined
Jul 18, 2006
Messages
958
Reaction score
8
Location
Huntington Beach, California
Rating - 85.4%
82   14   0
FS: Reproduction Atari Dust Discs (several different type)

It's come to my attention that some of you might be looking for a good deal on various dust discs for Atari controllers. I've reproduced four different type of dust discs and, so far, have only made two of the four available on my website.

If you're in need of one, I have them available right now for KLOV members @ $5ea, shipping included!

Check them out:

DSC08081.JPG

The first dust disc type is for the 720 controller. It's made from 1/16" black ABS material - laser cut to perfection!



DSC08085.JPG

These are for the Food Fight and Red Baron analog "gimbal" joysticks. The material is laser cut 0.093" black ABS.


DSC08087.JPG

These are made specifically for the Assault controllers. Very similar to the dust disc for the Logo sticks, these are ever so slightly different. I decided to make a run specific for this controller. The material is laser cut 1/16" black ABS.


DSC08089.JPG

The last one may be perhaps the most useful of the entire line-up as this part is used on many different type of controllers. This dust disc is used on all "Logo" sticks (Gauntlet, etc), Hall Effect sticks, Xybots sticks and Peter Pack Rat sticks. The material is laser cut 1/16" black ABS.


Remember, these are only $5 per dust disc, shipped anywhere! If there's any chance you might need more than one, please grab them now as I intend to keep this offer open for a very limited time.

My paypal email is [email protected]

Thanks for looking.

Dave

P.S. Here's a picture of all four different type next to each other:

DSC08091.JPG
 
Last edited:
They were all made from ABS - some stamped and some injection molded.

I stuck with ABS, but I laser cut them from sheet stock.

Edit: BTW, laser cutting ABS is very smelly! I had to do this over a weekend while my staff wasn't around.

Dave
 
Last edited:
Nice. Thanks for providing these. I will check my games to see if any are missing or need replacing.

Scott C.
 
Back
Top Bottom