FS Repro Reactor Control Panel & Marquee Grill

Takeman

Well-known member
Joined
Nov 7, 2005
Messages
6,066
Reaction score
1,201
Location
Illinois
Rating - 100%
231   0   0
Reactor Control Panel, speaker grills & Phoenix Arcade's Reactor CPO & Marquee overlays.

Heres the deal. I'll offer the speaker grills (powder coated) in pairs only for $25. The cp is powder coated black, die punched w/ studs for lights at $65. total is $90 for the pair, or you can purchase seperately. (panel or speaker grill pair)

The Phoenix Arcade art set which includes the Marquee overlay and control panel overlay is $120 (sold together only)

If both the metal parts and the artwork are purchased together, at the same time, a combined discount of $20 applies.

For example: both items combined equal $210. $20 discount for buying both sets (art & metal) = $190 plus $18 in shipping for a total of $208 which includes, new grills, control panel and both the control panel overlay and marquee overlay.

Metal Panel & grills only is $108 shipped

Grills Only is $32 shipped

Panel Only $81 shipped

Everything will be shipped together in 1 box. So you're also saving on seperate shipping from 2 different vendors.

Shipping in USA 48 will be $18

Paypal payments to [email protected] Be sure you put your KLOV name in the comments and what payment is for. Dont forget your contact info

1. Project (ie Reactor panel, grills & art)
2. KlOV Alias
3. Name & Shipping address
4. Email address

I'd like to get 12 presold to make this work right. From the time I say go, expect 3-4 weeks. I am going to run enough for everyone who prepays before the deadline, likely to be the minimum of 25. I will update on a regular basis.

I did bump the price a little due to the very low interest shown in the the initial interest thread. This was done at the request of several interested member in order to get the project done.

I'll give the pre-order until September 12th @6pm Central time. After the 12th, the panel will go up if* there are any left over from my minimum run of 25. If there is no where near enough interest to get this done, I'll refund all monies.

-----------------------
Mrbill08 x1 metal set - Ready for Pick Up
Fudd x1 metal set - SHIPPED
Fizgig x1 metal set - SHIPPED
Seawolf x1 metal set - Ready for Pick Up
Tronic x1 metal set & Artwork - Ready for Pick Up
Vindog x1 metal set -SHIPPED
-----------------------

6 Metal sets / 1 artwork package
 
Last edited:
I'll do a panel and pair of speaker grills.

Payment sent.

Bill
 
paypal sent for panel and grills. dont need the grills but i'll prolly just sell them off on ebay.....

i'll also pop for 1 or 2 extra panels and grills if it is necessary to make this happen, just let me know troy...
 
Last edited:
Lets not forget that Tronic has the PCB laid out to sell blanks for you to build your own Reactor pcb (in the near future) or you can wait for JROK's Gottlieb board. Either way, dont snooze on this.....
 
I am in for one of these panels.

I am pretty close to getting the Reactor Interface board proto, just finishing up a few things on the Quantum.
 
I have an update on this. Since there is such a low demand on the Reactor panels, I spoke with my metal fab guy about running other Gottlieb panels with it to count towards my minimums. He agreed, but the price per panel is the same. So, I am now going to offer Qbert & Mad Palanets panels in the same run as Reactor. Same quality, die punched and powder coated black.

I am also going to bump this 2 weeks to give the other titles a chance. Lets get this done!

If I get 25 panels between the titles (Reactor, Mad Plants & Qbert, I will drop the price back down to $55 each and refund $10 to each person per panel.
 
Last edited:
Is there a full kit still available ?? I don't have a machine but I love it when people do these type of things and want to support it :D
 
These are done, finally :) They look really nice. I'll begin shipping shortly. I only ran 13 of these and I have a couple left if anyone missed the thread.
 
Looking for the full speaker/marquee panel. I know this is an old thread but I figured it was worth a shot!
 
Back
Top Bottom