FS: Rebuilt Amplifone deflection board.

ArcRevival

Well-known member
Joined
Aug 31, 2006
Messages
10,147
Reaction score
1,099
Location
RAPID CITY, South Dakota
Rating - 100%
47   0   0
This is a board that I have rebuilt with lots of new parts and solder. That said, it still seems to have what I would call a little more jitter than normal in attract mode. It's not excessive. During game play you won't notice it. The words at the top of the screen seem to jitter just a little bit more than normal. It might bother you, it might not. I have spent a lot of time on this board and decided to just sell it as is before I move. If you buy it and are seriously unhappy with it, I will refund your money ( return shipping is on you) if you let me know within a day or so of receiving it and send it back right away.

It has new X-Y pots, new transistors on the heat sink, new and upgraded msu07 and 57's with new shoulder washers, all new caps, some new diodes and resistors, new solder on the fuse holders and new fuses and new solder on all the large resistors, the harness has been removed, re-stripped and replaced, the jumpers have been replaced with wire. It's been tested in my game for several hours.

This board is really clean. I just want to sell it instead of packing it away.

$185 shipped in lower 48.

P1040662.jpg

P1040674.jpg

P1040671.jpg

P1040668.jpg
 
Back
Top Bottom