FS: RAM Controls Reproduction Parts (Got Major Havoc Roller Controllers right here!)

Daviea

Permanently Banned - See: Ram Controls Forum Secti
Joined
Jul 18, 2006
Messages
958
Reaction score
8
Location
Huntington Beach, California
Rating - 85.4%
82   14   0
FS: RAM Controls Reproduction Parts (Got Major Havoc Roller Controllers right here!)

Hey everyone,

Here's the latest RAM Controls "special" pricing plan for KLOV members. Look over the list below and PM me with your order. I'm still allowing the "pay after you get it" deal, so don't worry about sending me any money until AFTER you have taken receipt of your order - nice and easy. However, please PAY me once you get your parts. So far, I've only had one guy not pay me yet. So, the odds have been good and I feel OK about keeping this offer alive.

$15 - 720 control stick (shaft and ball knob)
$10 - 720 Centering Disc
$10 - 720 Encoder Disc
$25 - 720 Dual Opto Encoder Board
$20 - 720 BASIC rebuilt kit (pivot ball, bushing, lower ball, roller)
$30 - 720 EXPANDED rebuilt kit (pivot ball, bushing, lower ball, roller, handle)
$40 - 720 DELUXE rebuilt kit (pivot ball, bushing, lower ball, roller, handle, encoder disc, centering disc)
$55 - 720 PREMIUM rebuilt kit (pivot ball, bushing, lower ball, roller, handle, encoder disc, centering disc, encoder board)
$10 - Tempest Encoder Disc
$20 - Food Fight control stick (shaft and ball knob)
$20 - 8' length of 2.25" Major Havoc/720 t-molding
$20 - 11' length of 1.5" Star Wars Cockpit t-molding
$12 - LOGO Stick Rebuild Kit for Atari "logo" sticks, Xybots, Assault, etc. Included Pivot Ball and Centering Plunger (BASIC)
$20 - LOGO Stick Rebuild Kit for Atari "logo" sticks, Xybots, Assault, etc. Included Pivot Ball, Centering Plunger and Actuator (DELUXE)
$15 - Red Baron controller shaft
$10 - 1.5" pivot ball (used on Food Fight, Red Baron and Battlezone)
$10 - two 5K potentiometers (used on Food Fight, Red Baron, Lunar Lander, Star Wars, etc)
$10 - two Star Wars yoke thumb buttons and springs
$40 - Missile command 4.5" trackball and two shafts (BASIC)
$50 - Missile command 4.5" trackball, 5 bearings and two shafts (DELUXE)
$50 - Star Wars yoke rebuild kit (Modified Standard - removed 60tooth gears, added triggers!)
$100 - Star Wars yoke rebuild kit (Modified Premium - removed 60tooth gears, added triggers!)
$40 - USB Adapter for yoke controller/paperboy controller (includes USB cable)
$25 - 2.25" Trackball Basic Rebuilt Kit (snow white ball, encoder shafts and idler shaft).
$40 - 2.25" Trackball Basic Rebuilt Kit (snow white ball, encoder shafts, idler shaft and 6 bearings).
$10 - 2.25" shafts (2 encoder shafts, 1 idler shaft)
$10 - 3.00" shafts (2 encoder shafts, 1 idler shaft)
$15 - two Star Wars yoke triggers and springs
$10 - tube of Nyogel 779ZC lubricant
$15 - 14tooth gear
$15 - 28tooth gear
$60 - Complete set of yoke handles (inside and outside for left and right).
$5 - Battlezone joystick handle "plug" blank
$8 - Battlezone/Red Baron/PeterPackRat joystick switch bezel
$15 - Atari LED button and CONE (you choose type: Short Black, Short Silver, Tall Black)
$13 - Atari Button Cone 6-pack Short Black
$14 - Atari Button Cone 6-pack Tall Black
$12 - Atari Button Cone 6-pack Short Silver
$150 - Major Havoc Roller Controller - great for those conversion cabs!

SHIPPING IS INCLUDED IN THE ABOVE PRICES. My paypal email is [email protected] or go "risk free" by placing order now and paying me as soon as you take receipt of your order!!

Send me a PM here on KLOV with your order. Be sure to include an itemized list of what you want AND your full name/shipping address.

Note: if you're short on cash, I will consider trades for the following: Xbox 360 games, Wii games, PSP games, various electronic test equipment, Intel Core i7 CPU's & motherboards, higher end video cards, hard drives and other PC related peripherals. I will also consider other items not on the list. Surprise me and make an offer!
 
Another great order here. I ordered the handles set and some rollers. Got em next day (today). I certainly didn't expect that. The finish on the yoke handles looks perfect!
 
$50 - Missile command 4.5" trackball, 5 bearings and two shafts (DELUXE)

Pm sent....
 
Hum... I must have got miss placed in all the private messages. I really need this trackball. Could I get a confirmation? I do have credit card in hand!
 
$50 - Missile command 4.5" trackball, 5 bearings and two shafts (DELUXE)

Trackball in hand! Nice Dave really nice! Payment sent via paypal right now.

You rock man!!! Ty
 
Ahhh... before the fall. :( Man I wish all these parts and others were always being cranked out and available at these prices all the time. Such promise, that ended so bad. What happened to all his equipment, tools, and such to make all this stuff? Wish someone else was doing it full time.

Sorry, I know there is no use looking up a dead horse's arse.

Oh well, at least we have Takeman and a few others.
 
Ahhh... before the fall. :( Man I wish all these parts and others were always being cranked out and available at these prices all the time. Such promise, that ended so bad. What happened to all his equipment, tools, and such to make all this stuff? Wish someone else was doing it full time.

Sorry, I know there is no use looking up a dead horse's arse.

Oh well, at least we have Takeman and a few others.

It's not possible unless you're scamming someone.

He was having samples made in China, not paying for them, then selling them for cheap (all profit) and likely shipping using stolen/borrowed Fed Ex credentials. It's not possible to produce and sell that stuff at those prices. It would be like if I stole recent BluRay DVDs and sold them for $5 to you. Good deal, huh!
 
True, but what about all the pictures of full bins of parts? It looked like way more than just samples- like he had thousands of many of the parts. And I know many of them were actually shipped or bought up by some of the resellers we have here on the forums. Unfortunately most of those parts are sold out now. :(

I know it just probably is not a very money making endeavor, but it would sure be awesome if everything Dave (or whatever alias of the day he used) was being done by someone else, minus all the scam stuff.

Oh, BTW- Joey, your cardboard bezels are fantastic! Got mine installed on Star Wars the other day. Top notch! ;)

It's not possible unless you're scamming someone.

He was having samples made in China, not paying for them, then selling them for cheap (all profit) and likely shipping using stolen/borrowed Fed Ex credentials. It's not possible to produce and sell that stuff at those prices. It would be like if I stole recent BluRay DVDs and sold them for $5 to you. Good deal, huh!
 
Back
Top Bottom