FS: RAM Controls Parts w/ KLOV Pricing (new parts added)

Daviea

Permanently Banned - See: Ram Controls Forum Secti
Joined
Jul 18, 2006
Messages
958
Reaction score
8
Location
Huntington Beach, California
Rating - 85.4%
82   14   0
FS: RAM Controls Parts w/ KLOV Pricing (new parts added)

Hey everyone,

Here's the latest RAM Controls "special" pricing plan for KLOV members. Look over the list below and PM me with your order. I'm still allowing the "pay after you get it" deal, so don't worry about sending me any money until AFTER you have taken receipt of your order - nice and easy. I've added a few items, so look it over closely.

$15 - 720 control stick (shaft and ball knob)
$10 - 720 Centering Disc
$10 - 720 Encoder Disc
$25 - 720 Dual Opto Encoder Board
$20 - 720 BASIC rebuilt kit (pivot ball, bushing, lower ball, roller)
$30 - 720 EXPANDED rebuilt kit (pivot ball, bushing, lower ball, roller, handle)
$40 - 720 DELUXE rebuilt kit (pivot ball, bushing, lower ball, roller, handle, encoder disc, centering disc)
$55 - 720 PREMIUM rebuilt kit (pivot ball, bushing, lower ball, roller, handle, encoder disc, centering disc, encoder board)
$10 - Tempest Encoder Disc
$20 - Food Fight control stick (shaft and ball knob)
$20 - 8' length of 2.25" Major Havoc/720 t-molding
$20 - 11' length of 1.5" Star Wars Cockpit t-molding
$12 - LOGO Stick Rebuild Kit for Atari "logo" sticks, Xybots, Assault, etc. Included Pivot Ball and Centering Plunger (BASIC)
$20 - LOGO Stick Rebuild Kit for Atari "logo" sticks, Xybots, Assault, etc. Included Pivot Ball, Centering Plunger and Actuator (DELUXE)
$15 - Red Baron controller shaft
$10 - 1.5" pivot ball (used on Food Fight, Red Baron and Battlezone)
$10 - two 5K potentiometers (used on Food Fight, Red Baron, Lunar Lander, Star Wars, etc)
$10 - two Star Wars yoke thumb buttons and springs
$40 - Missile command 4.5" trackball and two shafts (BASIC)
$50 - Missile command 4.5" trackball, 5 bearings and two shafts (DELUXE)
$50 - Star Wars yoke rebuild kit (Modified Standard - removed 60tooth gears, added triggers!)
$100 - Star Wars yoke rebuild kit (Modified Premium - removed 60tooth gears, added triggers!)
$40 - USB Adapter for yoke controller/paperboy controller (includes USB cable)
$25 - 2.25" Trackball Basic Rebuilt Kit (snow white ball, encoder shafts and idler shaft).
$40 - 2.25" Trackball Basic Rebuilt Kit (snow white ball, encoder shafts, idler shaft and 6 bearings).
$10 - 2.25" shafts (2 encoder shafts, 1 idler shaft)
$10 - 3.00" shafts (2 encoder shafts, 1 idler shaft)
$15 - two Star Wars yoke triggers and springs
$10 - tube of Nyogel 779ZC lubricant
$15 - 14tooth gear
$15 - 28tooth gear
$60 - Complete set of yoke handles (inside and outside for left and right).
$5 - Battlezone joystick handle "plug" blank
$8 - Battlezone/Red Baron/PeterPackRat joystick switch bezel
$15 - Atari LED button and CONE (you choose type: Short Black, Short Silver, Tall Black)
$13 - Atari Button Cone 6-pack Short Black
$14 - Atari Button Cone 6-pack Tall Black
$12 - Atari Button Cone 6-pack Short Silver
$150 - Major Havoc Roller Controller

SHIPPING IS INCLUDED IN THE ABOVE PRICES. Paypal email is [email protected] OR you can wait to get it and THEN pay me.

PM on KLOV with your order.
 
Last edited:
$15 - two Star Wars yoke triggers and springs

SHIPPING IS INCLUDED IN THE ABOVE PRICES. Paypal email is [email protected] OR you can wait to get it and THEN pay me.

PM on KLOV with your order.

AARGH. I just bought these from you earlier this week at the "KLOV price" for DOUBLE that and with no springs! Oh well. At least they arrived at warp speed :D
 
These are for the HAPP version trackball units. I've never seen the Betson shafts up close, so I've never bothered making any. Is there any demand for them?

Your 3" trackball shafts - are they for Betson or Happ trackballs? Happ rollers are slightly longer on the encoder end.
 
These are for the HAPP version trackball units. I've never seen the Betson shafts up close, so I've never bothered making any. Is there any demand for them?

I had this conversation with Bob Roberts too. He used to have a guy make him up a batch of Betson ones occasionally. He says there's no demand for them anymore though, and that most people just hack the Happ's to fit.

Honestly, I wonder how there isn't a market for them considering the amount of used Betson trackballs on the market.

Anyways, I'll take a set of them and I'll see how involved and how much of a hack it is to mod them to a Betson.
 
Can't send you a private message your box is too full

$20 - LOGO Stick Rebuild Kit for Atari "logo" sticks, Xybots, Assault, etc. Included Pivot Ball, Centering Plunger and Actuator (DELUXE)[/I]

This includes the cushion ring?
 
Back
Top Bottom