FS Parts: FS: Quantum reproduction wiring harness (and CP harness too)

joemagiera

Thread Manager
Joined
Mar 22, 2003
Messages
6,162
Reaction score
1,073
Rating - 100%
108   0   0
FS: Quantum reproduction wiring harness (and CP harness too)

No interest check.

No pre-order.

No build wait time.

Quantum reproduction wiring harnesses are available for sale right now. In fact, you paypal me by 8:00AM central time Saturday morning, March 2, 2013, I'll ship it out USPS Priority (CP harness shipped USPS First Class) before noon same day and you'll likely have it Monday or Tuesday. You'll get an auto-email from USPS with the tracking info. This is a limited one-time only run. Get 'em now while I have them.

Full pictures here: http://www.missilecommand.org/Quantum_wiring/Quantum_wiring.html

Here's the cost details, because I know that's what you really want to know more than anything else, (IF YOU PAY BY PAYPAL, PLEASE USE CORRECT PAYPAL):

Cash, check (personal check ok), money order, cashier's check or personal/gift/existing balance (or you pay all fees) paypal ([email protected] ):
Local pick up (no shipping)
PCB $154 (includes PCB and Audio Reg harness)
CP $39 (includes control panel and midi-track ball harness) ($15 increase as of 6-27-2017, I had to have these rerun and the company raised their price)
Both $193 (includes all 4 harness pieces)

Shipped
PCB $166 (includes PCB and Audio Reg harness, sent USPS Priority)
CP $44 (includes control panel and midi-track ball harness, sent USPS First Class) (price increase 6-27-2017)
Both $205 (includes all 4 harness pieces, sent USPS Priority) (doesn't add up because of combined shipping)

Note: For paypal payments marked personal/gift, paypal does not supply a shipping name and address. Please make sure to email me that info.

Note: paypal payments marked personal/gift gives up paypal buyer protection. This is a non-ebay transaction and I refuse to pay the paypal fees. If you are uncomfortable with no paypal buyer protection, then please pay by another method or pay the paypal fees.

Paypal any other way than identified above ([email protected] ):
Local pick up (no shipping)
PCB $158.92 (includes PCB and Audio Reg harness)
CP $40.47 (includes control panel and midi-track ball harness) (price increase 6-27-2017)
Both $199.39 (includes all 4 harness pieces)

Shipped
PCB $171.28 (includes PCB and Audio Reg harness, sent USPS Priority)
CP $45.62 (includes control panel and midi-track ball harness, sent USPS First Class) (price increase 6-27-2017)
Both $211.75 (includes all 4 harness pieces, sent USPS Priority) (doesn't add up because of combined shipping)

Please read this notice to be sure you know and understand what you would be getting, especially "supporting comment" on the last row, as sales are final, no returns, no complaints that you didn't understand what is included (and what would still be needed):
http://www.missilecommand.org/Quantum_wiring/Atari_color_vector_wiring_tag_numbers.pdf

An original unhacked harness was used at the model. All wire colors, lengths, size, type and connectors were matched to the original (with the exception of the 4" extension of the monitor connection to allow for Wells Gardner monitors). All wires were twisted if appropriate. They look great. All were 100% continuity tested to match the original.

Questions? Let me know.

Control panel and midi-track ball:
CP_TBr.jpg

Audio Reg:
Audio_Regr.jpg

PCB:
PCBr.jpg

Audio Reg & PCB (sold together), as shipped:
as_shippedr.jpg
 

Attachments

  • CP_TBr.jpg
    CP_TBr.jpg
    44.4 KB · Views: 46
  • Audio_Regr.jpg
    Audio_Regr.jpg
    44.8 KB · Views: 53
  • PCBr.jpg
    PCBr.jpg
    44 KB · Views: 44
Last edited:
Questions:

do we need to supply the on/off switch?

Does it have the wiring tail for the interlock switch?

And i will email as well...
 
Email sent to [email protected]
Re: Freight Question - Australia

Please send any/all email questions to [email protected]

First class to Australia: $30
Priority: $49

do we need to supply the on/off switch?
Does it have the wiring tail for the interlock switch?

Yes, you would need to supply your own on/off switch wiring. I haven't proven this yet, but I think you can jumper this right on the transformer brick itself and not need any wiring for this (other than the jumper wire).

Quantum did not come stock with an interlock switch for the back door, so no, not included. Note: If someone feels it did come with a switch, can you please show me a pic? I looked at a few different Quantums and never saw this.
 
Last edited:
Please send any/all email questions to [email protected]
First class to Australia: $30
Priority: $49

OK, will do

I bought Dokert's CP harness, so will only need the other parts
What is the all up price if I pay the PP fees please (First class freight), I had trouble with the figures sorry

IE Please pay $xxx.xx
 
Last edited:
It's 2.5 percent here, but if your overseas, there's a currency conversion rate.. the last payment i took from overseas, ended up being about 7+ percent, kinda like being raped.
 
Questions:

do we need to supply the on/off switch?

Does it have the wiring tail for the interlock switch?

And i will email as well...

The power switch is not included and neither is the wiring for it because it's a separate short section that is about 24" long and easily obtained from other games. If you need Digikey part numbers for the switch section connector housing and terminals, I have them on hand so just pm me or something. Bob Roberts sells a very nice switch on a square metal plate. That's what I'm using.

There is no interlock switch in Quantum.

Bill B.
 
would it match up to black widow? i have a complete harness from one to look at on hand.
 
:D Paypal payment sent for 1x PCB/Audio-reg harness. I got a Dokert CP already.
If you need a few bucks more to ship to Ontario Canada, just let me know.

Thanks for doing these. I had started making my own and I even made my own wiring panel like those seen in your pictures. Still, and of course, yours blows mine away like 20 different ways. Heck, I spent more on materials just getting set up for it than you are charging for your finished set. For future reference, I would have paid twice as much for this product without complaint ;) .

I can't wait to get this installed and get my new game up and running. This is so cool and I'm so excited, it feels like I'm finally getting a Christmas present that I actually like! And it's not even Christmas!

Thanks so much !

Bill B.
 
would it match up to black widow? i have a complete harness from one to look at on hand.

If you are still refering to the power switch and its wiring, then yes. According to Joes chart that he linked to in the original post...
http://www.tollianweb.com/uc/Atari_color_vector_wiring_tag_numbers.pdf

The Quantum and Black Widow switch harness are the exact same Atari part number so a direct swap should be just fine. My Space Duel cabs all look the same down there, at least to me they do, as my repro Quantum cab. They have the same power brick and the switch is located in the same place. If there's any difference, I'm not seeing it.

Bill B.
 
If you are still refering to the power switch and its wiring, then yes. According to Joes chart that he linked to in the original post...
http://www.tollianweb.com/uc/Atari_color_vector_wiring_tag_numbers.pdf

The Quantum and Black Widow switch harness are the exact same Atari part number so a direct swap should be just fine. My Space Duel cabs all look the same down there, at least to me they do, as my repro Quantum cab. They have the same power brick and the switch is located in the same place. If there's any difference, I'm not seeing it.

Bill B.

I think the difference on Space Duel versus Quantum on the audio reg is number of speakers. Doesn't Space Duel have 2 speakers and Quantum (and Black Widow and Gravitar) only have 1?
 
FS: Quantum reproduction wiring harness (and CP harness too)

Sent email and payment for 1 complete set!

Thanks for making these!!

Warblade
 
I think the difference on Space Duel versus Quantum on the audio reg is number of speakers. Doesn't Space Duel have 2 speakers and Quantum (and Black Widow and Gravitar) only have 1?

Yes, and the Space Duel speakers are just in series.
On Space Duel, there's a 2p connector P32/J32 and a 3p connector P40/J40 that on Quantum were combined into a single 5p connector P40/J40. However, the power switch section is identical.

Bill B.
 
Back
Top Bottom