FS: Pole Position parts

tinsley

Member
Joined
Mar 28, 2010
Messages
457
Reaction score
1
Location
Connecticut
Rating - 100%
5   0   0
I have a few Pole Position parts I no longer need.

Pole Position cab (pickup only - can also have monitor in it; has Pole Position screen burn) - FREE
Pole Position bezel (good conditions; 1 small spot of flaking) - $40 shipped
Pole Position steering assembly (works 100%) - $35 shipped
Pole Position shifter assembly (works 100%) - $25 shipped
Complete Pole Position wiring harnesses - $25 shipped each
Pole Position PCB cage - $15 shipped
Pole Position reproduction marquee - $15 shipped [SOLD]
Pole Position shroud (has cig burns) - $20 shipped

Buy more then 1 thing and prices could be adjusted.
 

Attachments

  • DSC00901.jpg
    DSC00901.jpg
    90.9 KB · Views: 30
  • DSC00902.jpg
    DSC00902.jpg
    92.2 KB · Views: 35
  • DSC00906.jpg
    DSC00906.jpg
    90.9 KB · Views: 27
Last edited:
wiring harness

Hi,

I'm interested in a complete wiring harness, if you could send it to Hungary, Budapest.
I just bought an empty Pole Position 2 cabinet, it would be great if you could.
Thanks in advance.
Greetings from Budapest
Bela
 
Hi,

I'm interested in a complete wiring harness, if you could send it to Hungary, Budapest.
I just bought an empty Pole Position 2 cabinet, it would be great if you could.
Thanks in advance.
Greetings from Budapest
Bela


A word of caution...

A PP2 from Budapest might be made by Namco, not Atari.
(..Atari only had the distribution rights for the US ).

If so, the wiring harness would be different
(...different power block, different PCB connectors ...)

I discovered this first-hand when I picked-up a Euro re-import PP2.

Cheers,
Steph
 
A PP2 from Budapest might be made by Namco, not Atari.
(..Atari only had the distribution rights for the US ).

If so, the wiring harness would be different
(...different power block, different PCB connectors ...)

I discovered this first-hand when I picked-up a Euro re-import PP2.

For those who might be curious...

Here are a few pics of a Namco PP2 board
with the notable differences with the Atari board.

http://www.arcade.chezsuys.com/Namco_PP.html

Cheers,
Steph
 
For those who might be curious...

Here are a few pics of a Namco PP2 board
with the notable differences with the Atari board.

http://www.arcade.chezsuys.com/Namco_PP.html

Cheers,
Steph
Thanks for the info Steph.
Just another question from a newbie, if I buy an Atari wiring harness and an original Atari pcb, could it be work in a Namco cab?
 
Just another question from a newbie, if I buy an Atari wiring harness and an original Atari pcb, could it be work in a Namco cab?


The power supply connectors are different between the Atari harness
and the Namco Harness.

Although with the proper schematics, it "should" be possible
to change an Atari harness to fit the Namco power supply.
(...although I'm not sure how the difference in voltage in handled
... it is 240V in Eurore isn't it ? )

The bulk of the wiring is for the game PCB.
If you have an Atari board with an Atari harness, 70% of the wiring will be good.
The other 30% going to the power brick will need to be fitted with new connectors.

That having been said, the cost of a working PP2 board and harness
and the work needed to modify it for your Namco cabinet
would almost led me to simply buy an entire new game
(...although that's probably not easy in Budapest..)

Cheers,
Steph
 
are these prices to high? i would like this stuff gone as it is just sitting here collecting dust. make me offers...
 
are these prices to high? i would like this stuff gone as it is just sitting here collecting dust. make me offers...

Hell the prices seem very fair. some of those things looks like shipping would cost more than you are charging.
 
FS: Nintendo Super System cab

Again, if you need more then 1 part, it will be cheaper. Just make an offer, it has been here to long...
 
Last edited:
Back
Top Bottom