http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280587154752&ssPageName=STRK:MESELX:IT
Atari Pole Position II Arcade Game, COMPLETE for repair
----$75.00----
PLEASE DO NOT SEND A MESSAGE ASKING ME TO PART THIS MACHINE
Atari Pole Position II Arcade Game
Wells Gardner 19" Monitor - Fresh cap kit installed. (was a recent replacement, so it does not have the GAVE OVER burn in) Monitor looks like it is missing RED colors though.
Powers on, boots up, goes through its normal garble test screens, then goes to its test diagnostic screen and resets. Does this in a continuous loop.
This arcade probably needs a new 5V power supply installed (an old AT, ~250 watt, computer power supply would work) to the game boards and the current power supply's 5V lead cut from the game boards.
Tested the test points on the game boards and the current power supply is not pumping out enough power right now, that is why it is restarting. I'd rather not fix this, so here it is.
Side art is in good condition. Foot pedal is a little rusty, but moves.
Coin Lights working. Marquee does not light up, probably a bulb or starter.
1 locks on the front, one on the back, all keys included.
PDF Manual on CD included. (back panel is included also)
NO SHIPPING. Unless you work it out.
LOCATED IN RHINELANDER, WI 54501
Attached Pics are of actual unit.
Atari Pole Position II Arcade Game, COMPLETE for repair
----$75.00----
PLEASE DO NOT SEND A MESSAGE ASKING ME TO PART THIS MACHINE
Atari Pole Position II Arcade Game
Wells Gardner 19" Monitor - Fresh cap kit installed. (was a recent replacement, so it does not have the GAVE OVER burn in) Monitor looks like it is missing RED colors though.
Powers on, boots up, goes through its normal garble test screens, then goes to its test diagnostic screen and resets. Does this in a continuous loop.
This arcade probably needs a new 5V power supply installed (an old AT, ~250 watt, computer power supply would work) to the game boards and the current power supply's 5V lead cut from the game boards.
Tested the test points on the game boards and the current power supply is not pumping out enough power right now, that is why it is restarting. I'd rather not fix this, so here it is.
Side art is in good condition. Foot pedal is a little rusty, but moves.
Coin Lights working. Marquee does not light up, probably a bulb or starter.
1 locks on the front, one on the back, all keys included.
PDF Manual on CD included. (back panel is included also)
NO SHIPPING. Unless you work it out.
LOCATED IN RHINELANDER, WI 54501
Attached Pics are of actual unit.
Attachments
Last edited:
