FS: Pole Position 2 parts/pcb

viewsonix

Member
Joined
May 7, 2009
Messages
955
Reaction score
10
Location
Virginia
Rating - 100%
15   0   0
Entire cabinet sold.


If someone local wants the entire cab, I will sell the whole thing for $150. Includes monitor, pcb, controls, a good marquee and a good bezel, plus all the other parts. Nothing taken off yet. Some damage to the right side of cab. Pictures to come today. I will not ship the entire game, you have to pick it up.

All part prices INCLUDE SHIPPING to lower 48. All parts from same cab.

Pole Position 2 pcb: boots to random ascii chars on screen. Looks like previous owner did the direct wiring to the PCB job on it, some damage to the harness connectors.

$75 includes wiring harness.


Metal cage that the PCB sits in. $25 .

Fan and used cardboard shroud that sits above the pcb/cage. $20

The 2 AR2 boards that come with the machine. $25 each.
 
Last edited:
I want the fan and shroud. How much for the monitor and marquee to 30215? If it's a TM-202, we can do just the chassis if that helps.
 
The marquee is a PP2, I think it's a vinyl that is not attached to the glass/plexi. It looked in good shape to me.

The tube is a Hitachi and the chassis is a G07.
The monitor itself was displaying a 'wave effect' thru the screen while it was on. I didn't see any 'Game Over' burn on it. I will check it closer tonight. The problem is trying to find a friggin box to ship a monitor safely. I tried once before and had no luck.
 
Last edited:
The marquee is a PP2, I think it's a vinyl that is not attached to the glass/plexi. It looked in good shape to me.

That's fine. Mine is also a PP2 marquee (machine is PP1), but it's burnt to heck so I'm just happy to have something nicer.

The tube is a Hitachi and the chassis is a G07.
The monitor itself was displaying a 'wave effect' thru the screen while it was on. I didn't see any 'Game Over' burn on it. I will check it closer tonight. The problem is trying to find a friggin box to ship a monitor safely. I tried once before and had no luck.

I know what you mean. Don't know if a G07 will sub onto TM-202 yoke. If so, we can do a chassis only ship. If you find a box and a way to ship, let me know. If it doesn't work out, no biggie.
 
Won't work. The 202 in a unique tube.

Thanks! Good info to know. Do you know if a 19" G07 fits nicely in the bezel opening of a PP that has a 202? I would think so, but my info says one is 20" and the other 19".
 
Someone just PM'ed me asking to buy the whole thing.

PLDoolittle has dibs on the shroud and fan.

If the other buyer wants the remainder then this is sold pending funds...
 
Thanks! Good info to know. Do you know if a 19" G07 fits nicely in the bezel opening of a PP that has a 202? I would think so, but my info says one is 20" and the other 19".

The tubes are the same size so both fill up the bezel the same. That is where the similarities end though.
 
Back
Top Bottom