Bullwinkle
Member
FS: PCBs -Misslie Command, Cruisin' USA, Wms Sys 3-7 powersupply boards and more...
Time to clear out the extra boards I've had lying around.
Missile Command PCB: been keeping it as a backup for my MC - I'm sure as soon as I sell this, my other one will crap out on me. I placed it in my machine last night to test, played a few games, works 100% asking $100 shipped : SOLD
Cruisin' USA PCB: It appears to be completely working but I don't have a Cruisin USA to test it in. What I do have is a California Speed and without connecting anything other than the main edge connector, it fires, goes through the self tests (all ICs show as good during IC test) and after calibrating (essentially just hitting enter through the calibration steps as my wheel and pedals are not hooked up), it boots. I can coin up and start a game, but because my steering wheel and pedals arent hooked up, I don't go anywhere
asking $95 shipped [EDIT] This does not come with the wheel driver board, just the main CPU/Sound board.
Williams System 3-7 Power supply board - rebuilt high voltage section with 90v transistors (displays are a bit dimmer (so I'm told..i don't notice it) but increases the lifespan), replaced power pin header (usually burnt), replaced all caps including large filter, works 100% - asking $45 shipped (I have 2 others I can rebuild if more than 1 person responds)
4 Pole Position (one might be a ppII) board sets without interconnects. I used these to make one set so they all have something not functioning properly and some are missing ICs. I'm not looking to make any money on these, just figured I'd offer them up to anyone who might want some parts boards or maybe fix them. Just pay actual shipping (most likely UPS) - SPOKEN FOR
pics available if needed. will be adding more as I go through what I have.
feel free to make an offer, i wont be offended and can always say no
Thanks,
Tom
Time to clear out the extra boards I've had lying around.
Missile Command PCB: been keeping it as a backup for my MC - I'm sure as soon as I sell this, my other one will crap out on me. I placed it in my machine last night to test, played a few games, works 100% asking $100 shipped : SOLD
Cruisin' USA PCB: It appears to be completely working but I don't have a Cruisin USA to test it in. What I do have is a California Speed and without connecting anything other than the main edge connector, it fires, goes through the self tests (all ICs show as good during IC test) and after calibrating (essentially just hitting enter through the calibration steps as my wheel and pedals are not hooked up), it boots. I can coin up and start a game, but because my steering wheel and pedals arent hooked up, I don't go anywhere
Williams System 3-7 Power supply board - rebuilt high voltage section with 90v transistors (displays are a bit dimmer (so I'm told..i don't notice it) but increases the lifespan), replaced power pin header (usually burnt), replaced all caps including large filter, works 100% - asking $45 shipped (I have 2 others I can rebuild if more than 1 person responds)
4 Pole Position (one might be a ppII) board sets without interconnects. I used these to make one set so they all have something not functioning properly and some are missing ICs. I'm not looking to make any money on these, just figured I'd offer them up to anyone who might want some parts boards or maybe fix them. Just pay actual shipping (most likely UPS) - SPOKEN FOR
pics available if needed. will be adding more as I go through what I have.
feel free to make an offer, i wont be offended and can always say no
Thanks,
Tom
Last edited: